diff options
| author | Rowan Border <rowanjborder@gmail.com> | 2020-06-30 14:35:56 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-30 17:23:32 +0200 |
| commit | 33fae8421e3270869c645fd304523133419d7f5d (patch) | |
| tree | c085b3b3cbbce5374c662a4290539fad0b2cdd9b /target/linux/ramips/mt76x8 | |
| parent | d59dc14515c812ba4c4101958bdc5dba37ab34cb (diff) | |
| download | upstream-33fae8421e3270869c645fd304523133419d7f5d.tar.gz upstream-33fae8421e3270869c645fd304523133419d7f5d.tar.bz2 upstream-33fae8421e3270869c645fd304523133419d7f5d.zip | |
ramips: add support for TP-Link RE220 v2
TP-Link RE220 v2 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN.
This port of OpenWRT leverages work done by Andreas Böhler <dev@aboehler.at>
for the TP-Link RE200 v2 as both devices share the same SoC, flash layout
and GPIO pinout.
Specifications
MediaTek MT7628AN (580 Mhz)
64 MB of RAM
8 MB of FLASH
2T2R 2.4 GHz and 1T1R 5 GHz
1x 10/100 Mbps Ethernet
UART header on PCB (57600 8n1)
8x LED (GPIO-controlled), 2x button
There are 2.4G and 5G LEDs in red and green which are controlled separately.
Web Interface Installation
It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.
Signed-off-by: Rowan Border <rowanjborder@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt76x8')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 1 | ||||
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 1 |
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 9db39cbdde..fcc6516c8d 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -68,6 +68,7 @@ tplink,archer-c50-v4) ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; tplink,re200-v2|\ +tplink,re220-v2|\ tplink,tl-mr3020-v3|\ tplink,tl-wa801nd-v5) ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index a06e47a54b..ecba0ccb17 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -17,6 +17,7 @@ ramips_setup_interfaces() ravpower,rp-wd009|\ tama,w06|\ tplink,re200-v2|\ + tplink,re220-v2|\ tplink,re305-v1|\ tplink,tl-mr3020-v3|\ tplink,tl-wr802n-v4|\ |