diff options
| author | Shiji Yang <yangshiji66@qq.com> | 2021-08-24 22:59:59 +0800 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-08-25 01:41:35 +0200 |
| commit | 09143282bde3abd560a3b70f76df6d77b6ac6f12 (patch) | |
| tree | e8f4b8a54af3a34797eb31efeea144aa76c08e9a /target/linux/ramips/mt76x8 | |
| parent | fcc075e12f6f4718ccac6b5eb68cb8346064ee43 (diff) | |
| download | upstream-09143282bde3abd560a3b70f76df6d77b6ac6f12.tar.gz upstream-09143282bde3abd560a3b70f76df6d77b6ac6f12.tar.bz2 upstream-09143282bde3abd560a3b70f76df6d77b6ac6f12.zip | |
ramips: add support for Motorola MWR03
Specifications:
* SOC: MT7628AN + MT7612E
* ROM: 8 MiB Flash
* RAM: 64 MiB DDR2
* WAN: 10/100M *1
* LAN: 10/100M *3
* Button: Reset *1
* LEDs: orange *1, white *1
* Antennas: 2.4 GHz *2 + 5 GHz *2
* TTL Baudrate: 57600
* TFTP Upgrade: IP: 192.168.51.1, Server: 192.168.51.100
MAC addresses as verified by OEM firmware:
use address source
2g *:d8 factory 0x0004 (label)
5g *:d9 factory 0x8004
LAN *:d7 factory $label -1
WAN *:da factory $label +2
Installation (TFTP + U-Boot):
* Connect device with a TTL cable and open a serial session by
PuTTY.
* Press "2" when booting to select "Load system code then write
to Flash via TFTP".
* Configure the IP of local host server.
* Upload firmware by tftpd64, it will boot when write instruction
is executed.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
[fix DTS line endings, fix label MAC address, adjust status LED
names, convert mtd-mac-address-increment to mac-address-increment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt76x8')
| -rw-r--r-- | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index ca115fd618..ea04391f9c 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -109,6 +109,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "6@eth0" ;; + motorola,mwr03) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "0:wan" "6@eth0" + ;; netgear,r6020|\ netgear,r6080|\ netgear,r6120) @@ -216,6 +220,10 @@ ramips_setup_macs() mercury,mac1200r-v2) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory_info 0xd)" 1) ;; + motorola,mwr03) + label_mac=$(mtd_get_mac_binary factory 0x4) + wan_mac=$(macaddr_add "$label_mac" 2) + ;; onion,omega2|\ onion,omega2p|\ vocore,vocore2|\ |