diff options
| author | Filip Moc <lede@moc6.cz> | 2020-11-24 22:15:26 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-11-25 13:23:06 +0100 |
| commit | b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c (patch) | |
| tree | b902644d19bed7d697333a10f5332baffbe80b3c /target/linux/ramips/mt76x8 | |
| parent | b31aaa0580c94bc69e1891932f41ff10e5cb2da2 (diff) | |
| download | upstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.tar.gz upstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.tar.bz2 upstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.zip | |
ramips: add support for TP-Link MR6400 v5
TL-MR6400v5 is very similar to TL-MR6400v4. Main differences are:
- smaller form factor
- different LED GPIOs
- different switch connections
You can flash via tftp recovery:
- serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24
- connect to any ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button
Flashing via OEM web interface does not work.
LTE module does not support DHCP so it must be configured via QMI.
Hardware Specification (v5.0 EU):
- SoC: MT7628NN
- Flash: Winbond W25Q64JVS (8MiB)
- RAM: ESMT M14D5121632A (64MiB)
- Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
- Ethernet: 1NIC (4x100M)
- WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
- Power: DC 9V 0.85A
Signed-off-by: Filip Moc <lede@moc6.cz>
Diffstat (limited to 'target/linux/ramips/mt76x8')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 4 | ||||
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 4 |
2 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 4ed38bf5f2..31bd9e05b1 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -79,6 +79,10 @@ tplink,tl-mr6400-v4) ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e" ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10" ;; +tplink,tl-mr6400-v5) + ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x07" + ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x08" + ;; tplink,tl-wr841n-v13) ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt" ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index a7e978a2e2..f4e3fcacb5 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -116,6 +116,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; + tplink,tl-mr6400-v5) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:wan" "6@eth0" + ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" |