aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt76x8
diff options
context:
space:
mode:
authorRobinson Wu <wurobinson@qq.com>2020-07-17 15:32:53 +0800
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-07-31 11:40:15 +0200
commit84cb0f7ace73fad15e29e1d74c469b37f90b334d (patch)
tree544e0b4abf8f349606bdad031044467270428f76 /target/linux/ramips/mt76x8
parentced167d72971e125825941dae22aad1d318c9dd2 (diff)
downloadupstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.gz
upstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.tar.bz2
upstream-84cb0f7ace73fad15e29e1d74c469b37f90b334d.zip
ramips: add support for JS76x8 series DEV boards
This commit adds support for the Jotale JS76x8 series development boards. These devices have the following specifications: - SOC: MT7628AN/NN, MT7688AN, MT7628DAN - RAM of MT7628AN/NN and MT7688AN: 64/128/256 MB (DDR2) - RAM of MT7628DAN: 64 MB (DDR2) - FLASH:8/16/32 MB (SPI NOR) - Ethernet:3x 10/100 Mbps ethernet ports (MT76x8 built-in switch) - WIFI:1x 2T2R 2.4 GHz Wi-Fi - LEDs:1x system status green LED, 1x wifi green LED, 3x ethernet green LED - Buttons:1x reset button - 1x microSD slot - 4x USB 2.0 port - 1x mini-usb debug UART - 1x DC jack for main power (DC 5V) - 1x TTL/RS232 UART - 1x TTL/RS485 UART - 13x GPIO header - 1x audio codec(wm8960) Installation via OpenWrt: The original firmware is OpenWrt, so both LuCI and sysupgrade can be used. Installation via U-boot web: 1. Power on board with reset button pressed, release it after wifi led start blinking. 2. Setup static IP 192.168.1.123/4 on your PC. 3. Go to 192.168.1.8 in browser and upload "sysupgrade" image. Installation via U-boot tftp: 1. Connect to serial console at the mini usb, which has been connected to UART0 on board (115200 8N1) 2. Setup static IP 192.168.1.123/4 on your PC. 3. Place openwrt-firmware.bin on your PC tftp server (192.168.1.123). 3. Connect one of LAN ports on board to your PC. 4. Start terminal software (e.g. screen /dev/ttyUSB0 115200) on PC. 5. Apply power to board. 6. Interrupt U-boot with keypress of "2". 7. At u-boot prompts: Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N) Y Input device IP (192.168.1.8) ==:192.168.1.8 Input server IP (192.168.1.123) ==:192.168.1.123 Input Linux Kernel filename (root_uImage) ==:openwrt-firmware.bin 8. board will download file from tftp server, write it to flash and reboot. Signed-off-by: Robinson Wu <wurobinson@qq.com> [add license to DTS files, fix state_default and reduce to the mimimum, move phy0tpt trigger to DTS, drop ucidef_set_led_timer, fix network ports] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt76x8')
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network17
1 files changed, 13 insertions, 4 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 0809109c13..cf7e88ebf1 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -92,6 +92,12 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
+ jotale,js76x8-8m|\
+ jotale,js76x8-16m|\
+ jotale,js76x8-32m)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "6@eth0"
+ ;;
netgear,r6020|\
netgear,r6080|\
netgear,r6120)
@@ -174,6 +180,13 @@ ramips_setup_macs()
totolink,a3)
wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40)
;;
+ jotale,js76x8-8m|\
+ jotale,js76x8-16m|\
+ jotale,js76x8-32m|\
+ skylab,skw92a|\
+ totolink,lr1200)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ ;;
mediatek,linkit-smart-7688|\
onion,omega2|\
onion,omega2p)
@@ -189,10 +202,6 @@ ramips_setup_macs()
wiznet,wizfi630s)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1)
;;
- skylab,skw92a|\
- totolink,lr1200)
- wan_mac=$(mtd_get_mac_binary factory 0x2e)
- ;;
tplink,archer-c20-v4|\
tplink,archer-c50-v3|\
tplink,tl-mr3420-v5|\