aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt76x8
diff options
context:
space:
mode:
authorFilip Moc <lede@moc6.cz>2020-11-24 22:15:26 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-11-25 13:23:06 +0100
commitb641eb6ecfbfc2c6a488483332d4b5a6ee4c736c (patch)
treeb902644d19bed7d697333a10f5332baffbe80b3c /target/linux/ramips/mt76x8
parentb31aaa0580c94bc69e1891932f41ff10e5cb2da2 (diff)
downloadupstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.tar.gz
upstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.tar.bz2
upstream-b641eb6ecfbfc2c6a488483332d4b5a6ee4c736c.zip
ramips: add support for TP-Link MR6400 v5
TL-MR6400v5 is very similar to TL-MR6400v4. Main differences are: - smaller form factor - different LED GPIOs - different switch connections You can flash via tftp recovery: - serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24 - connect to any ethernet port - power on the device while holding the reset button - wait at least 8 seconds before releasing reset button Flashing via OEM web interface does not work. LTE module does not support DHCP so it must be configured via QMI. Hardware Specification (v5.0 EU): - SoC: MT7628NN - Flash: Winbond W25Q64JVS (8MiB) - RAM: ESMT M14D5121632A (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 1NIC (4x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 9V 0.85A Signed-off-by: Filip Moc <lede@moc6.cz>
Diffstat (limited to 'target/linux/ramips/mt76x8')
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network4
2 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index 4ed38bf5f2..31bd9e05b1 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -79,6 +79,10 @@ tplink,tl-mr6400-v4)
ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x0e"
ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x10"
;;
+tplink,tl-mr6400-v5)
+ ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x07"
+ ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x08"
+ ;;
tplink,tl-wr841n-v13)
ucidef_set_led_wlan "wlan2g" "wlan2g" "green:wlan" "phy0tpt"
ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x2"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index a7e978a2e2..f4e3fcacb5 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -116,6 +116,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
;;
+ tplink,tl-mr6400-v5)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:wan" "6@eth0"
+ ;;
tplink,tl-wr902ac-v3)
ucidef_add_switch "switch0" \
"4:lan" "6@eth0"