aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt76x8/base-files
diff options
context:
space:
mode:
authorErnst Spielmann <endspiel@disroot.org>2020-04-16 18:42:29 +0000
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-24 18:14:59 +0200
commitc3dc52e39ac83704b7a376d8d5610bdb91807e3f (patch)
treed13a695b9518c7cf0bd164e07f3cf5b9200ab930 /target/linux/ramips/mt76x8/base-files
parenta765b063ee3e1dd6519f6a4a9e4d4f72214b33b8 (diff)
downloadupstream-c3dc52e39ac83704b7a376d8d5610bdb91807e3f.tar.gz
upstream-c3dc52e39ac83704b7a376d8d5610bdb91807e3f.tar.bz2
upstream-c3dc52e39ac83704b7a376d8d5610bdb91807e3f.zip
ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1
Specifications: - MT7628NN @ 580 MHz - 32 MB RAM - 8 MB Flash - 5x 10/100 Mbps Ethernet (built-in switch) - 2.4 GHz WLAN - 2x external, non-detachable antennas (1x for RT-N10P V3) Flash instructions: 1. Set PC network interface to 192.168.1.75/24. 2. Connect PC to the router via LAN. 3. Turn router off, press and hold reset button, then turn it on. 4. Keep the button pressed till power led starts to blink. 5. Upload the firmware file via TFTP. (Any filename is accepted.) 6. Wait until the router reboots. Signed-off-by: Ernst Spielmann <endspiel@disroot.org> [fix node/property name for state_default] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt76x8/base-files')
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/mt76x8/base-files/etc/board.d/02_network21
2 files changed, 18 insertions, 9 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
index c66e13d3c5..685895452a 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds
@@ -20,6 +20,12 @@ case $board in
alfa-network,awusfree1)
set_wifi_led "$boardname:blue:wlan"
;;
+asus,rt-n10p-v3|\
+asus,rt-n11p-b1|\
+asus,rt-n12-vp-b1)
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0xf"
+ ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+ ;;
cudy,wr1000)
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index d758fe5543..398b5e88c7 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -26,6 +26,18 @@ ramips_setup_interfaces()
ucidef_add_switch_attr "switch0" "enable" "false"
ucidef_set_interface_lan "eth0"
;;
+ asus,rt-n10p-v3|\
+ asus,rt-n11p-b1|\
+ asus,rt-n12-vp-b1|\
+ hiwifi,hc5661a|\
+ mediatek,mt7628an-eval-board|\
+ mercury,mac1200r-v2|\
+ totolink,lr1200|\
+ wavlink,wl-wn570ha1|\
+ wavlink,wl-wn575a3)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
+ ;;
buffalo,wcr-1166ds)
ucidef_add_switch "switch0" \
"3:lan" "4:wan" "6@eth0"
@@ -67,15 +79,6 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
- hiwifi,hc5661a|\
- mediatek,mt7628an-eval-board|\
- mercury,mac1200r-v2|\
- totolink,lr1200|\
- wavlink,wl-wn570ha1|\
- wavlink,wl-wn575a3)
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
- ;;
hiwifi,hc5761a)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "4:wan" "6@eth0"