diff options
| author | Lars Wessels <software@bytebox.org> | 2020-06-25 21:09:59 +0200 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2020-06-29 01:08:01 +0200 |
| commit | dbaf0d20bb6afec4a592456af6b1238b46fa1acb (patch) | |
| tree | 6d6d2a66cc28bfc036847f375d947ff164fdcf51 /target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | |
| parent | 5234593462bc72582fafd0769d3b679f9b598574 (diff) | |
| download | upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.gz upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.bz2 upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.zip | |
ramips: add support for WAVLINK WL-WN577A2
This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band
wall-plug wireless router. In Germany this device is sold under the brand
name Maginon WL-755 (white case):
Device specifications:
- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps (Ralink RT3050)
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER
- Buttons: Reset, WPS
- Small sliding power switch
Flashing instructions (U-boot):
- Configure a TFTP server on your PC/Laptop and set its IP
to 192.168.10.100
- Rename the OpenWrt image to firmware.bin and place it in the
root folder of the TFTP server
- Power off (using the small sliding power switch on the left
side) the device and connect an ethernet cable from its LAN
or WAN port to your PC/Laptop
- Press the WPS button (and keep it pressed)
- Power on the device (using the small power switch)
- After a few seconds, when the WAN/LAN LED stops blinking
very fast, release the WPS button
- Flashing OpenWrt takes less than a minute, system will
reboot automatically
- After reboot the WPS LED will indicate the current OpenWrt
running status
Signed-off-by: Lars Wessels <software@bytebox.org>
[removed unused labels - fix whitespace errors - wrap commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/mt76x8/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 7 |
1 files changed, 6 insertions, 1 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 2b4ca0926f..1cccc16415 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -38,7 +38,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; - buffalo,wcr-1166ds) + buffalo,wcr-1166ds|\ + wavlink,wl-wn577a2) ucidef_add_switch "switch0" \ "3:lan" "4:wan" "6@eth0" ;; @@ -186,6 +187,10 @@ ramips_setup_macs() wiznet,wizfi630s) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1) ;; + wavlink,wl-wn577a2) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$(mtd_get_mac_binary factory 0x4) + ;; skylab,skw92a|\ totolink,lr1200) wan_mac=$(mtd_get_mac_binary factory 0x2e) |