diff options
| author | Filip Moc <lede@moc6.cz> | 2020-11-18 20:38:21 +0100 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2020-11-23 00:46:40 +0000 |
| commit | 0d65177658dfec9fe99bbad4e37cf44f0642d831 (patch) | |
| tree | 49df58e6477510f3a67965714bc2b121bd4ac6c8 /target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | |
| parent | 1e69106e348e45c9783e91474fc336af8311deeb (diff) | |
| download | upstream-0d65177658dfec9fe99bbad4e37cf44f0642d831.tar.gz upstream-0d65177658dfec9fe99bbad4e37cf44f0642d831.tar.bz2 upstream-0d65177658dfec9fe99bbad4e37cf44f0642d831.zip | |
ramips: add support for TP-Link MR6400 v4
You can flash via tftp recovery:
- serve tftp-recovery image as /tp_recovery.bin on 192.168.0.225/24
- connect to any ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button
Flashing via OEM web interface does not work.
LTE module does not support DHCP so it must be configured via QMI.
Hardware Specification (v4.0 EU):
- SoC: MT7628NN
- Flash: Winbond W25Q64JVS (8MiB)
- RAM: ESMT M14D5121632A (64MiB)
- Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
- Ethernet: 1NIC (4x100M)
- WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
- Power: DC 9V 0.85A
Signed-off-by: Filip Moc <lede@moc6.cz>
Diffstat (limited to 'target/linux/ramips/mt76x8/base-files/etc/board.d/02_network')
| -rwxr-xr-x | target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index a6272e5a55..a7e978a2e2 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -112,6 +112,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; + tplink,tl-mr6400-v4) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" + ;; tplink,tl-wr902ac-v3) ucidef_add_switch "switch0" \ "4:lan" "6@eth0" |