diff options
| author | Arınç ÜNAL <arinc.unal@arinc9.com> | 2023-03-29 13:11:30 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-05-18 14:44:07 +0200 |
| commit | ce1f9fa625ab7d2159b90d76df5030a55a3de419 (patch) | |
| tree | c459ebb9a5afcf0e02f33978e56df5d103c35796 /target/linux/ramips/mt7621 | |
| parent | c42847989eae6ec6fb9762163871291079cb609e (diff) | |
| download | upstream-ce1f9fa625ab7d2159b90d76df5030a55a3de419.tar.gz upstream-ce1f9fa625ab7d2159b90d76df5030a55a3de419.tar.bz2 upstream-ce1f9fa625ab7d2159b90d76df5030a55a3de419.zip | |
ramips: add support for TOZED ZLT S12 PRO
The TOZED ZLT S12 PRO is an AC1200 router featuring 4 Ethernet ports with a
TOZED TL70-C cellular modem which supports the NCM mode.
The stock firmware does SIM locking on the modem by stopping dialing when a
different PLMN is detected. This is not the case on OpenWrt.
Specifications:
- CPU: MediaTek MT7621AT
- RAM: 256MB DDR3
- NOR Flash: MX25L12833FM2I 16MB SPI Flash
- Wi-Fi 2.4Ghz: MT7603E
- Wi-Fi 5Ghz: MT7612E
- Switch: MT7530 4x 1Gbit Ports
- WWAN: Unisoc SL8563 based TOZED TL70-C LTE CAT6 cellular modem
- USB: 1x optional USB2.0 external port
- Switches/Buttons: WPS, Reset, Power Switch
- LEDs: Power, Wi-Fi, Data, Signal 1-5, Phone
Installation and TFTP Recovery:
- Connect to serial console.
- Boot initramfs image by choosing option 1 when U-Boot prompts.
- Install sysupgrade image via OpenWrt.
Serial Pins:
Located at the bottom right when looking from the front, right under the
Reset/WPS buttons. The pinout from the left is:
- RX
- GND
- TX
Baudrate is 115200.
When connecting from a powered off state, disconnect RX as it blocks the
boot process.
Link: http://www.sztozed.com/en/contents/58/84.html
Co-developed-by: Andre Cruz <me@1conan.com>
Signed-off-by: Andre Cruz <me@1conan.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 4 | ||||
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches | 3 |
2 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 5b7cc7f2ca..176d15b730 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -108,6 +108,10 @@ ramips_setup_interfaces() mikrotik,routerboard-760igs) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4 lan5" "wan sfp" ;; + tozed,zlt-s12-pro) + ucidef_set_interface "wwan" device "/dev/ttyUSB0" protocol "ncm" + uci add_list firewall.@zone[1].network='wwan' + ;; tplink,deco-m4r-v4) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches index ec2bf695a0..aebb416371 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/03_gpio_switches @@ -12,6 +12,9 @@ mikrotik,routerboard-760igs) telco-electronics,x1) ucidef_add_gpio_switch "modem_reset" "Modem Reset" "496" ;; +tozed,zlt-s12-pro) + ucidef_add_gpio_switch "lt72_power" "Power LTE modem" "lt72_power" "1" + ;; tplink,eap235-wall-v1|\ tplink,eap615-wall-v1) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "poe-passthrough" |