diff options
| author | Andreas Böhler <dev@aboehler.at> | 2021-03-22 01:01:44 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-05-16 20:26:38 +0200 |
| commit | 9ee6ac00c43cc253ac554495edb6214563ab1f31 (patch) | |
| tree | f2c4b1f430c485539c0fb8f575dc850820a83c0a /target/linux/ramips/mt7621 | |
| parent | 771ea6f2e3868b208b5261ae676160d5ef6544e8 (diff) | |
| download | upstream-9ee6ac00c43cc253ac554495edb6214563ab1f31.tar.gz upstream-9ee6ac00c43cc253ac554495edb6214563ab1f31.tar.bz2 upstream-9ee6ac00c43cc253ac554495edb6214563ab1f31.zip | |
ramips: Add support for SERCOMM NA502S
The SERCOMM NA502s is a smart home gateway manufactured by SERCOMM and sold
under different brands (among others, A1 Telekom Austria SmartHome Premium
Gateway). It has multi-protocol radio support in addition to LAN and WiFi.
Note: BLE and audio are currently unsupported.
Specifications
--------------
- MT7621ST 880MHz, Single-Core, Dual-Thread
- MT7603EN 2.4GHz WiFi
- MT7662EN 5GHz WiFi + BLE
- 128MiB NAND
- 256MiB DDR3 RAM
- SD3503 ZWave Controller
- EM357 Zigbee Coordinator
- Telit UMTS module
- Rechargeable battery
- speaker and microphone
MAC address assignment
----------------------
LAN MAC is read from the config partition, WiFi 2.4GHz is LAN+2 and matches
the OEM firmware. WiFi 5GHz with LAN+1 is an educated guess since the
OEM firmware does not enable 5GHz WiFi.
Installation
------------
Attach serial console, then boot the initramfs image via TFTP.
Once inside OpenWrt, run sysupgrade -n with the sysupgrade file.
Attention: The device has a dual-firmware design. We overwrite kernel2,
since kernel1 contains an automatic recovery image.
If you get NAND ECC errors and are stuck with bad eraseblocks, try to
erase the mtd partition first with
mtd unlock ubi
mtd erase ubi
This should only be needed once.
Signed-off-by: Andreas Böhler <dev@aboehler.at>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 1 | ||||
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh | 1 |
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 688c39940d..a8d8b8eef2 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -13,6 +13,7 @@ ramips_setup_interfaces() mikrotik,routerboard-m11g|\ netgear,ex6150|\ sercomm,na502|\ + sercomm,na502s|\ thunder,timecloud|\ tplink,re350-v1|\ tplink,re500-v1|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index c818c7e7cc..407611a6a2 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -84,6 +84,7 @@ platform_do_upgrade() { netis,wf2881|\ raisecom,msg1500-x-00|\ sercomm,na502|\ + sercomm,na502s|\ xiaomi,mi-router-3g|\ xiaomi,mi-router-3-pro|\ xiaomi,mi-router-4|\ |