diff options
| author | Sebastian Schaper <openwrt@sebastianschaper.net> | 2023-01-07 13:45:44 +0100 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-01-07 17:56:10 +0100 |
| commit | 3c31f6b521bb5fc49e222a8f2bcd454b73452a0e (patch) | |
| tree | cf688f668119769ff697c824e8782dd12bdc5edf /target/linux/ramips/mt7621 | |
| parent | 11759a5bf3c62846ded3d8946322802d41ac8984 (diff) | |
| download | upstream-3c31f6b521bb5fc49e222a8f2bcd454b73452a0e.tar.gz upstream-3c31f6b521bb5fc49e222a8f2bcd454b73452a0e.tar.bz2 upstream-3c31f6b521bb5fc49e222a8f2bcd454b73452a0e.zip | |
ramips: add support for D-Link DAP-X1860 A1
The DAP-X1860 is a wall-plug AX1800 repeater.
Specifications:
- MT7621, 256 MiB RAM, 128 MiB SPI NAND
- MT7915 + MT7975 2x2 802.11ax (DBDC)
- Ethernet: 1 port 10/100/1000
- LED RSSI bargraph (2x green, 1x red/orange), status
and RSSI LEDs are incorrectly populated red/orange
(should be red/green according to documentation)
Installation:
- Keep reset button pressed during plug-in
- Web Recovery Updater is at 192.168.0.50
- Upload factory.bin, confirm flashing
(seems to work best with Chromium-based browsers)
Revert to OEM firmware:
- tar -xvf DAP-X1860_RevA_Firmware_101b94.bin
- openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \
-out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ==
- tar -xvf FWImage.st1
- flash kernel_DAP-X1860.bin via Recovery
Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Diffstat (limited to 'target/linux/ramips/mt7621')
4 files changed, 16 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 9e0eaac941..5fafb9b50a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -56,6 +56,13 @@ jcg,y2|\ xzwifi,creativebox-v1) ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan" ;; +dlink,dap-x1860-a1) + ucidef_set_rssimon "wlan1" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100" + ;; dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index dea433dec4..9a8e385a31 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ ramips_setup_interfaces() ampedwireless,ally-00x19k|\ asus,rp-ac56|\ asus,rp-ac87|\ + dlink,dap-x1860-a1|\ edimax,re23s|\ mikrotik,ltap-2hnd|\ mikrotik,routerboard-m11g|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 69ecaefd27..161bd942db 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -22,6 +22,13 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress ;; + dlink,dap-x1860-a1) + hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" + [ "$PHYNBR" = "0" ] && \ + macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && \ + macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress + ;; dlink,dir-853-a3) [ "$PHYNBR" = "0" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index fd856e6b3a..53ff9c016c 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -59,6 +59,7 @@ platform_do_upgrade() { beeline,smartbox-giga|\ beeline,smartbox-turbo|\ belkin,rt1800|\ + dlink,dap-x1860-a1|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ |