diff options
author | Chukun Pan <amadeus@jmu.edu.cn> | 2021-02-08 16:28:10 +0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-02-09 13:10:33 +0100 |
commit | 82032f350991af08a918f0fcaac81ff82e836d88 (patch) | |
tree | ff831861c93a578b7397c209a43e6659b0e2fb24 /target/linux/ramips/mt7621 | |
parent | 98d61b516fa2087dab8d3e3eb845c47b55e2b704 (diff) | |
download | upstream-82032f350991af08a918f0fcaac81ff82e836d88.tar.gz upstream-82032f350991af08a918f0fcaac81ff82e836d88.tar.bz2 upstream-82032f350991af08a918f0fcaac81ff82e836d88.zip |
ramips: add support for JCG Y2
JCG Y2 is an AC1300M router
Hardware specs:
SoC: MediaTek MT7621AT
Flash: Winbond W25Q128JVSQ 16MiB
RAM: Nanya NT5CB128M16 256MiB
WLAN: 2.4/5 GHz 2T2R (1x MediaTek MT7615)
Ethernet: 10/100/1000 Mbps x5
LED: POWER, INTERNET, 2.4G, 5G
Button: Reset
Power: DC 12V,1A
Flash instructions:
Upload factory.bin in stock firmware's upgrade page.
MAC addresses map:
0x0004 *:c8 wlan2g/wlan5g/label
0xe000 *:c7 lan
0xe006 *:c6 wan
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Diffstat (limited to 'target/linux/ramips/mt7621')
-rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 1 | ||||
-rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 15 |
2 files changed, 9 insertions, 7 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 8d91b36346..5fa9ad3fe8 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -19,6 +19,7 @@ d-team,newifi-d2) ;; d-team,pbr-m1|\ gehua,ghl-r-001|\ +jcg,y2|\ xzwifi,creativebox-v1) ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan" ;; diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index dbb8e04abb..46cb65ffbe 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -113,6 +113,14 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) label_mac=$wan_mac ;; + jcg,y2|\ + wavlink,wl-wn531a6|\ + winstars,ws-wn583a6|\ + zbtlink,zbt-we1326|\ + zbtlink,zbt-wg3526-16m|\ + zbtlink,zbt-wg3526-32m) + label_mac=$(mtd_get_mac_binary factory 0x4) + ;; linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) @@ -128,13 +136,6 @@ ramips_setup_macs() wan_mac=$label_mac lan_mac=$(macaddr_add $label_mac 1) ;; - wavlink,wl-wn531a6|\ - winstars,ws-wn583a6|\ - zbtlink,zbt-we1326|\ - zbtlink,zbt-wg3526-16m|\ - zbtlink,zbt-wg3526-32m) - label_mac=$(mtd_get_mac_binary factory 0x4) - ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac |