diff options
| author | Maxim Anisimov <maxim.anisimov.ua@gmail.com> | 2022-11-11 12:52:38 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-11-20 16:44:24 +0100 |
| commit | 21762e46535d154a2e349ae2d646e2ea6926f365 (patch) | |
| tree | d46e74442fef7bfa55e2d3fa5851f019ed83719f /target/linux/ramips/mt7621 | |
| parent | a28297d395d4253c03f362bc1ac1974b0b4f825e (diff) | |
| download | upstream-21762e46535d154a2e349ae2d646e2ea6926f365.tar.gz upstream-21762e46535d154a2e349ae2d646e2ea6926f365.tar.bz2 upstream-21762e46535d154a2e349ae2d646e2ea6926f365.zip | |
ramips: add support for Keenetic KN-3010
Keenetic KN-3010 is a 2.4/5 Ghz band 11ac (Wi-Fi 5) router, based on MT7621DAT.
Specification:
- System-On-Chip: MT7621DAT
- CPU/Speed: 880 MHz
- Flash-Chip: Winbond w25q256
- Flash size: 32768 KiB
- RAM: 128 MiB
- 5x 10/100/1000 Mbps Ethernet
- 4x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- Wireless No1 (2T2R): MT7603E 2.4 GHz 802.11bgn
- Wireless No2 (2T2R): MT7613BE 5 GHz 802.11ac
- 4x LED, 2x button, 1x mode switch
Notes:
- The device supports dual boot mode
- The firmware partitions were concatinated into one
- The FN button led indicator has been reassigned as the 2.4GHz
wifi indicator.
Flash instruction:
The only way to flash OpenWrt image is to use tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24 and tftp server.
2. Rename "openwrt-ramips-mt7621-keenetic_kn-3010-squashfs-factory.bin"
to "KN-3010_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed until power led start blinking.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 9bac8228a0..42e50451e3 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -75,6 +75,9 @@ dlink,dir-882-r1) gnubee,gb-pc2) ucidef_set_led_netdev "ethyellow" "ethyellow" "orange:ethyellow" "ethyellow" "link tx rx" ;; +keenetic,kn-3010) + ucidef_set_led_netdev "internet" "internet" "green:internet" "wan" + ;; linksys,e5600) ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link" ;; |