diff options
| author | WonJung Kim <git@won-jung.kim> | 2021-12-22 15:59:00 +0900 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2021-12-29 20:35:57 +0100 |
| commit | 2dde2416e1a2f7a3208095e29c20132ed9910889 (patch) | |
| tree | e403aff89ba9c07f4c4ce50defd7d02f2102f069 /target/linux/ramips/mt7621 | |
| parent | 482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1 (diff) | |
| download | upstream-2dde2416e1a2f7a3208095e29c20132ed9910889.tar.gz upstream-2dde2416e1a2f7a3208095e29c20132ed9910889.tar.bz2 upstream-2dde2416e1a2f7a3208095e29c20132ed9910889.zip | |
ramips: add support for ipTIME A3004T
ipTIME A3004T is a 2.4/5GHz band router, based on Mediatek MT7621.
Specifications:
- SoC: MT7621 (880MHz)
- RAM: DDR3 256M
- Flash: NAND 128MB (Macronix NAND 128MiB 3,3V 8-bit)
- WiFi:
- 2.4GHz: MT7615E
- 5GHz : MT7615E
- Ethernet:
- 4x LAN
- 1x WAN
- USB: 1 * USB3.0 port
- UART:
- 3.3V, TX, RX, GND / 57600 8N1
Installation via web interface:
1. Flash initramfs image using OEM's Recovery mode
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
- Flash stock firmware via OEM's Recovery mode
How to use OEM's Recovery mode:
1. Power up with holding down the reset key until CPU LED stop blinking.
2. Set fixed ip with `192.168.0.2` with subnet mask `255.255.255.0`
3. Flash image via tftp to `192.168.0.1`
Additional Notes:
This router shares one MT7915E chip for both 2.4Ghz/5Ghz.
radio0 will not working on 5Ghz as it's not connected to the antenna.
Signed-off-by: WonJung Kim <git@won-jung.kim>
(added led dt-bindings)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 6e8e205403..790de22f40 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -58,6 +58,7 @@ platform_do_upgrade() { dlink,dir-2660-a1|\ dlink,dir-853-a3|\ hiwifi,hc5962|\ + iptime,a3004t|\ jcg,q20|\ linksys,e5600|\ linksys,ea7300-v1|\ |