diff options
| author | Josh Bendavid <joshbendavid@gmail.com> | 2020-07-14 17:39:21 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-09-06 19:09:45 +0200 |
| commit | b5dd746cbb1aaf91f4b68e9f3eda97413550d904 (patch) | |
| tree | dcbf209df9d704941f150f930479b948621c2479 /target/linux/ramips/mt7621 | |
| parent | ba72ed537c4a063e1143b9efae579112fee7c42a (diff) | |
| download | upstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.tar.gz upstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.tar.bz2 upstream-b5dd746cbb1aaf91f4b68e9f3eda97413550d904.zip | |
ramips: add support for D-Link DIR-2660 A1
This patch adds support for D-Link DIR-2660 A1.
Specifications:
* Board: AP-MTKH7-0002
* SoC: MediaTek MT7621AT
* RAM: 256 MB (DDR3)
* Flash: 128 MB (NAND)
* WiFi: MediaTek MT7615N (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 2.0, 1 USB 3.0
* Buttons: Reset, WPS
* LEDs: Power (white/orange), Internet (white/orange), WiFi 2.4G (white),
WiFi 5G (white), USB 3.0 (white), USB 2.0 (white)
Notes:
* WiFi 2.4G and WiFi 5G LEDs are wired directly to the wireless chips
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
MAC addresses:
lan factory 0xe000 *:a7 (label)
wan factory 0xe006 *:aa
2.4 factory 0xe000 +1 *:a8
5.0 factory 0xe000 +2 *:a9
Seems like vendor didn't replace the dummy entries in the calibration data.
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
[rebase onto already merged DIR-1960 A1, add MAC addresses to commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh | 1 |
2 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 8708de33c1..c5cd446809 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -26,7 +26,8 @@ d-team,pbr-m1|\ gehua,ghl-r-001) ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "wan" ;; -dlink,dir-1960-a1) +dlink,dir-1960-a1|\ +dlink,dir-2660-a1) ucidef_set_led_netdev "wan" "wan" "$boardname:white:net" "wan" ;; dlink,dir-860l-b1|\ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 90749f589b..b1feea7ae6 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -46,6 +46,7 @@ platform_do_upgrade() { asus,rt-ac65p|\ asus,rt-ac85p|\ dlink,dir-1960-a1|\ + dlink,dir-2660-a1|\ hiwifi,hc5962|\ linksys,ea7300-v1|\ linksys,ea7500-v2|\ |