aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7621
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2020-12-11 23:14:58 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-29 15:32:07 +0100
commiteb11cd9ea3822b34df6260b1dd40fc4f0866b804 (patch)
treee018ff967cbaafd4aeb81c0d8d30c932f173b1b5 /target/linux/ramips/mt7621
parent0071c7cd8246197ae27d8a0c4b5bdf7976dbe362 (diff)
downloadupstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.tar.gz
upstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.tar.bz2
upstream-eb11cd9ea3822b34df6260b1dd40fc4f0866b804.zip
ramips: add support for ELECOM WRC-2533GHBK-I
ELECOM WRC-2533GHBK-I is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, RX, GND, TX from SoC side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GHBK-I normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing MAC addresses: LAN : BC:5C:4C:xx:xx:89 (Config, ethaddr (text)) WAN : BC:5C:4C:xx:xx:88 (Config, wanaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:8A (Factory, 0x4 (hex)) 5GHz : BC:5C:4C:xx:xx:8B (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7621')
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network5
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 154f218bfe..dbb8e04abb 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -98,6 +98,11 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
+ elecom,wrc-2533ghbk-i)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ label_mac=$wan_mac
+ ;;
hiwifi,hc5962)
lan_mac=$(mtd_get_mac_ascii bdinfo "Vfac_mac ")
label_mac=$lan_mac