diff options
| author | Kyoungkyu Park <choryu.park@choryu.space> | 2021-11-14 01:03:24 +0900 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2021-12-12 20:33:19 +0900 |
| commit | 9a1b9a42b793104bd65bfd292d4935b061d5da33 (patch) | |
| tree | adc9bb19297779557b59b8c86dca80e30b8fe9cc /target/linux/ramips/mt7621 | |
| parent | 91e37b60a0b1181b77aabf7269450bf76d220c40 (diff) | |
| download | upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.tar.gz upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.tar.bz2 upstream-9a1b9a42b793104bd65bfd292d4935b061d5da33.zip | |
ramips: add support for HUMAX E10
HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router,
based on MediaTek MT7621A.
Specifications:
- SoC: MT7621A
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB (MXIC MX25L12805D)
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 2x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x USB 2.0 Type-A
- UART: J1 (57600 8N1)
- pinout: [3V3] (RXD) (GND) (TXD)
Installation via web interface:
- Flash **factory** image through the stock web interface.
Recovery procedure:
1. Connect ethernet cable between Router **LAN** port and PC Ethernet port.
2. Set your computer to a static IP **192.168.1.1**
3. Turn the device off and wait a few seconds. Hold the WPS button on front
of device and insert power.
4. Send a firmware image to **192.168.1.6** using TFTP.
You can use any TFTP client. (tftp, curl, Tftpd64...)
- It can accept both images which is
HUMAX stock firmware dump (0x70000-0x1000000) image
and OpenWRT **sysupgrade** image.
Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>
[remove trailing whitespace]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7621')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 47f978baf8..342704ee30 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -30,6 +30,7 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; asiarf,ap7621-001|\ + humax,e10|\ winstars,ws-wn583a6) ucidef_set_interfaces_lan_wan "lan" "wan" ;; |