diff options
| author | Maksym Medvedev <redrathnure@gmail.com> | 2019-11-15 23:21:22 +0100 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-01-04 16:49:59 +0100 |
| commit | 663b1a14e59074a23b86237e0b13dc6e78a6e50b (patch) | |
| tree | d9a10ef4fd2456c70ef565792cff0c36149160ad /target/linux/ramips/mt7621/base-files | |
| parent | f64c64a91c86e07a9d34ff268df77b9625e11bd1 (diff) | |
| download | upstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.tar.gz upstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.tar.bz2 upstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.zip | |
ramips: add support for Edimax RA21S
Edimax RA21S is a dual band 11ac router,
based on MediaTek MT7621A and MT7615N chips.
Specification:
- SoC: MediaTek MT7621A dual-core @ 880MHz
- RAM: 256M (Nanya NT5CC128M16IP)
- FLASH: 16MB (Macronix MX25L12835F)
- WiFi: 2.4/5 GHz 4T4R
- 2.4GHz MediaTek MT7615N bgn
- 5GHz MediaTek MT7615N nac
- Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
- USB: No
- BTN: Reset, WPS
- LED: 4 red LEDs, indistinguishable when case closed
- UART: through-hole on PCB.
J1: 3.3V - RX - GND - TX / 57600-8N1. 3.3V is the square pad
Installation:
Update the factory image via the OEM web-interface
(by default: http://192.168.2.1/)
User: admin
Password: 1234
The sysupgrade image can be installed via TFTP
from the U-Boot bootloader. Connect via ethernet port 2.
Tested on device by @UAb5eSMn
Signed-off-by: Maksym Medvedev <redrathnure@gmail.com>
[split DTS and take over improvements from RG21S, extend commit
message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index a3b9c079a6..4e8e2cb9ed 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -87,6 +87,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" ;; + edimax,ra21s|\ edimax,rg21s) ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" @@ -198,6 +199,7 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii factory wanmac) label_mac=$(mtd_get_mac_binary radio 0x4) ;; + edimax,ra21s|\ edimax,rg21s) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) |