aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7621/base-files
diff options
context:
space:
mode:
authorMaksym Medvedev <redrathnure@gmail.com>2019-11-15 23:21:22 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-01-04 16:49:59 +0100
commit663b1a14e59074a23b86237e0b13dc6e78a6e50b (patch)
treed9a10ef4fd2456c70ef565792cff0c36149160ad /target/linux/ramips/mt7621/base-files
parentf64c64a91c86e07a9d34ff268df77b9625e11bd1 (diff)
downloadupstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.tar.gz
upstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.tar.bz2
upstream-663b1a14e59074a23b86237e0b13dc6e78a6e50b.zip
ramips: add support for Edimax RA21S
Edimax RA21S is a dual band 11ac router, based on MediaTek MT7621A and MT7615N chips. Specification: - SoC: MediaTek MT7621A dual-core @ 880MHz - RAM: 256M (Nanya NT5CC128M16IP) - FLASH: 16MB (Macronix MX25L12835F) - WiFi: 2.4/5 GHz 4T4R - 2.4GHz MediaTek MT7615N bgn - 5GHz MediaTek MT7615N nac - Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN) - USB: No - BTN: Reset, WPS - LED: 4 red LEDs, indistinguishable when case closed - UART: through-hole on PCB. J1: 3.3V - RX - GND - TX / 57600-8N1. 3.3V is the square pad Installation: Update the factory image via the OEM web-interface (by default: http://192.168.2.1/) User: admin Password: 1234 The sysupgrade image can be installed via TFTP from the U-Boot bootloader. Connect via ethernet port 2. Tested on device by @UAb5eSMn Signed-off-by: Maksym Medvedev <redrathnure@gmail.com> [split DTS and take over improvements from RG21S, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files')
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/02_network2
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index a3b9c079a6..4e8e2cb9ed 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -87,6 +87,7 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
;;
+ edimax,ra21s|\
edimax,rg21s)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
@@ -198,6 +199,7 @@ ramips_setup_macs()
wan_mac=$(mtd_get_mac_ascii factory wanmac)
label_mac=$(mtd_get_mac_binary radio 0x4)
;;
+ edimax,ra21s|\
edimax,rg21s)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)