diff options
author | Keith Harrison <keithh@protonmail.com> | 2023-01-07 10:23:03 -0500 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2023-01-14 19:09:56 +0100 |
commit | c13263ca07a8d0d7b7eeb02261723f409550c9dd (patch) | |
tree | b3127c8c293b8db7bad43dcaed687c4d6e49f831 /target/linux/ramips/mt7621/base-files/etc | |
parent | acd3b5e83b99879b326a940907a9ff334586f86b (diff) | |
download | upstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.tar.gz upstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.tar.bz2 upstream-c13263ca07a8d0d7b7eeb02261723f409550c9dd.zip |
ramips: add support for D-Link DIR-1935 A1
Add support for D-Link DIR-1935 A1 based on similarities to DIR-882 A1,
DIR-867 A1 and other DIR-8xx A1 models. Existing DIR-882 A1 openwrt
"factory" firmware installs without modificaitons via the D-Link
Recovery GUI and has no known incompatibilities with the DIR-1935 A1.
Changes to be committed:
new file: target/linux/ramips/dts/mt7621_dlink_dir-1935-a1.dts
modified: target/linux/ramips/image/mt7621.mk
modified: target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
Specifications:
* Board: Not known
* SoC: MediaTek MT7621 Family
* RAM: 128 MB (DDR3)
* Flash: 16 MB (SPI NOR)
* WiFi: MediaTek MT7615 Family (x2)
* Switch: 1 WAN, 4 LAN (Gigabit)
* Ports: 1 USB 3.0
* Buttons: Reset, WiFi Toggle, WPS
* LEDs: Power (green/orange), Internet (green/orange), WiFi 2.4G (green),
WiFi 5G (green)
Notes:
* 160MHz 5GHz is available in LuCi but does not appear to work (i.e. no
SSID is visible in wifi scanning apps on other devices) with either
official DIR-882 A1 firmware or a test build for the DIR-1935 A1 based
on the 22.03.2 branch. 80 MHz 5GHz works.
Serial port:
* Untested (potential user damage/error)
* Expected to be identical to other DIR-8xx A1 models:
* Parameters: 57600, 8N1
* Location: J1 header (close to the Reset, WiFi and WPS buttons)
* Pinout: 1 - VCC
2 - RXD
3 - TXD
4 - GND
Installation:
* D-Link Recovery GUI: power down the router, press and hold the reset
button, then re-plug it. Keep the reset button pressed until the power
LED starts flashing orange, manually assign a static IP address under
the 192.168.0.xxx subnet (e.g. 192.168.0.2) and go to http://192.168.0.1
* Some modern browsers may have problems flashing via the Recovery GUI,
if that occurs consider uploading the firmware through cURL:
curl -v -i -F "firmware=@file.bin" 192.168.0.1
Signed-off-by: Keith Harrison <keithh@protonmail.com>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc')
-rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 0f0d8009ca..91f3fe6e93 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -78,6 +78,7 @@ dlink,dir-853-a3) dlink,dir-853-r1) ucidef_set_led_netdev "internet" "internet" "blue:net" "wan" ;; +dlink,dir-1935-a1|\ dlink,dir-860l-b1|\ dlink,dir-867-a1|\ dlink,dir-878-a1|\ |