diff options
| author | Leon M. George <leon@georgemail.eu> | 2020-12-24 11:32:47 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2021-06-10 17:09:35 +0200 |
| commit | d11f40a0f75bddb1339c6a0423553080acaeb75e (patch) | |
| tree | 72ef65b18bbaf085411ab5e4a903f58552b2bda4 /target/linux/ramips/mt7621/base-files/etc | |
| parent | 31be36126929751ac90ad6ff74a1df32feeb8e21 (diff) | |
| download | upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.tar.gz upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.tar.bz2 upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.zip | |
ramips: add support for cudy WR2100
Specifications
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac
MT7603E / MT7615E
Ethernet: 5x Gbit ports
Installation
There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.
Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.
R4 & R5 need to be shorted (0-100Ω) for the UART to work.
Signed-off-by: Leon M. George <leon@georgemail.eu>
[remove non-required switch-port node - remove trgmii phy-mode]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3501db9b9b4a71ae52c539b46af817783c327866)
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index e3064ad5ff..2e280442bf 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -12,6 +12,13 @@ asus,rt-n56u-b1) ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan" ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan" ;; +cudy,wr2100) + ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" + ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" + ucidef_set_led_netdev "lan3" "lan3" "green:lan3" "lan3" + ucidef_set_led_netdev "lan4" "lan4" "green:lan4" "lan4" + ucidef_set_led_netdev "wan" "wan" "green:wan" "wan" + ;; d-team,newifi-d2) ucidef_set_led_netdev "internet" "internet" "amber:internet" "wan" ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "blue:wlan2g" "wlan0" |