diff options
| author | Rosen Penev <rosenp@gmail.com> | 2021-03-22 14:06:14 -0700 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-09-11 01:30:11 +0200 |
| commit | 26a6a6a60ba74875b5ef819ac5765d3bcbbb930e (patch) | |
| tree | abdc820f7c53e0c315bfbf8a1bce789e80c9da1b /target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | |
| parent | fe609889e2f0f60f21bd36a05eb5ea7fee61bd1a (diff) | |
| download | upstream-26a6a6a60ba74875b5ef819ac5765d3bcbbb930e.tar.gz upstream-26a6a6a60ba74875b5ef819ac5765d3bcbbb930e.tar.bz2 upstream-26a6a6a60ba74875b5ef819ac5765d3bcbbb930e.zip | |
ramips: add support for Belkin RT1800
Belkin RT1800 is an 802.11ax (Wi-Fi 6) router, based on MediaTek
MT7621A.
Specifications:
- SoC: MT7621 (880MHz, 2 Cores)
- RAM: 256 MB
- Flash: 128 MB NAND
- Wi-Fi:
- MT7915D: 2.4/5 GHz (DBDC)
- Ethernet: 5x 1GiE MT7530
- USB: 1x USB 3.0
- UART: J4 (57600 baud)
- Pinout: [3V3] (TXD) (RXD) (blank) (GND)
Notes:
* This device has a dual-boot partition scheme, but this firmware works
only on boot partition 1.
Installation:
Upload the generated factory.bin image via the stock web firmware
updater.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac')
| -rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index d1ce370cad..98bc6c1ccf 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -84,6 +84,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress ;; + belkin,rt1800) + hw_mac_addr=$(mtd_get_mac_ascii Config wan_hwaddr) + [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress + ;; netgear,wax202) hw_mac_addr=$(mtd_get_mac_ascii Config mac) [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress |