diff options
| author | Andrew Pikler <andrew.pikler@gmail.com> | 2020-10-05 17:16:44 +0300 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-22 19:11:50 +0100 |
| commit | 28262f815e4d0fe5302babc696ed5ce518b33759 (patch) | |
| tree | 2d0cff9a36ae80ae550d363c0f2ff63dc9b9eeee /target/linux/ramips/mt7621/base-files/etc/board.d | |
| parent | 40437b18f41918d7bbbb7da986b8842bf82f9ff0 (diff) | |
| download | upstream-28262f815e4d0fe5302babc696ed5ce518b33759.tar.gz upstream-28262f815e4d0fe5302babc696ed5ce518b33759.tar.bz2 upstream-28262f815e4d0fe5302babc696ed5ce518b33759.zip | |
ramips: add support for D-Link DIR-882 R1
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7615N (x2)
- Switch: 1 WAN, 4 LAN (Gigabit)
- Ports: 1 USB 2.0, 1 USB 3.0
- Buttons: Reset, WiFi Toggle, WPS
- LEDs: Power, Internet, WiFi 2.4G WiFi 5G, USB 2.0, USB 3.0
The R1 revision is identical to the A1 revision except
- No Config2 Parition, therefore
- factory partition resized to 64k from 128K
- Firmware partition offset is 0x50000 not 0x60000
- Firmware partitions size increased by 64K
- Firmware partition type is "denx,uimage", not "sge,uimage"
- Padding of image creation "uimage-padhdr 96" removed
Installation:
- Older firmware versions: put the factory image on a USB stick, turn on
the telnet console, and flash using the following cmd
"fw_updater Linux /mnt/usb_X_X/firmware.bin"
- D-Link FailsafeUI:
Power down the router, press and hold the reset button, then
re-plug it. Keep the reset button pressed until the internet LED stops
flashing, then jack into any lan port and manually assign a static IP
address in 192.168.0.0/24 other than 192.168.0.0 (e.g. 192.168.0.2)
and go to http://192.168.0.1
Flash with the factory image.
Signed-off-by: Andrew Pikler <andrew.pikler@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7621/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index cd1814cc2b..8d91b36346 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -30,7 +30,8 @@ dlink,dir-2660-a1) dlink,dir-860l-b1|\ dlink,dir-867-a1|\ dlink,dir-878-a1|\ -dlink,dir-882-a1) +dlink,dir-882-a1|\ +dlink,dir-882-r1) ucidef_set_led_netdev "wan" "wan" "green:net" "wan" ;; gnubee,gb-pc1|\ |