aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7620
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2019-11-12 01:23:07 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-05-17 18:41:48 +0200
commita4e9c8f14b63cd44300ed452312c03a69aae9ca1 (patch)
tree0b3a77ff42a5e42b489913ac9e0e461a4d12c119 /target/linux/ramips/mt7620
parent46674723e1a44785b7638a7a1069139312c08bc2 (diff)
downloadupstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.gz
upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.bz2
upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.zip
ramips: add support for netis WF2770
netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/mt7620')
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/02_network5
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 20932f60e9..c1dbf8d71d 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -170,6 +170,7 @@ ramips_setup_interfaces()
"1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0"
;;
linksys,e1700|\
+ netis,wf2770|\
ralink,mt7620a-mt7530-evb)
ucidef_add_switch "switch0"
ucidef_add_switch_attr "switch0" "enable" "false"
@@ -338,6 +339,10 @@ ramips_setup_macs()
linksys,e1700)
wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR)
;;
+ netis,wf2770)
+ wan_mac=$(mtd_get_mac_binary factory 0x2e)
+ label_mac=$wan_mac
+ ;;
tplink,archer-c2-v1|\
tplink,archer-c20-v1|\
tplink,archer-c20i|\