aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7620
diff options
context:
space:
mode:
authorKyoungkyu Park <choryu.park@choryu.space>2021-12-25 04:48:22 +0900
committerSungbo Eo <mans0n@gorani.run>2022-01-15 20:05:46 +0900
commit6041c693dd4660f1585322c182e83479afb3c381 (patch)
tree8cd20014371e868716acca55f8e62a34cd2dd6c7 /target/linux/ramips/mt7620
parent7f7705923a8299323057e78ccae4473b5bb05807 (diff)
downloadupstream-6041c693dd4660f1585322c182e83479afb3c381.tar.gz
upstream-6041c693dd4660f1585322c182e83479afb3c381.tar.bz2
upstream-6041c693dd4660f1585322c182e83479afb3c381.zip
ramips: add support for HUMAX E2
HUMAX E2 (also known as HUMAX QUANTUM E2) is a 2.4/5GHz band AC router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 8MB (MXIC MX25L6405D) - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610E - Ethernet: 1x 10/100Mbps - Switch: SoC internal - UART: J2 (57600 8N1) - pinout: [3V3] (RXD) (GND) (TXD) Installation and Recovery via TFTP: 1. Connect ethernet cable between Router port and PC Ethernet port. 2. Set your computer to a static IP **192.168.1.1** 3. Turn the device off and wait a few seconds. Hold the WPS button on front of device and insert power. 4. Send a firmware image to **192.168.1.6** using TFTP. You can use any TFTP client. (tftp, curl, Tftpd64...) 5. Wait until Power LED stop flashing. **DO NOT TURN OFF DEVICE!** The device will be automatically rebooted. Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>
Diffstat (limited to 'target/linux/ramips/mt7620')
-rw-r--r--target/linux/ramips/mt7620/base-files/etc/board.d/01_leds3
-rw-r--r--target/linux/ramips/mt7620/base-files/etc/board.d/02_network3
2 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index 694f3d1541..8d438538fc 100644
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -125,6 +125,9 @@ hnet,c108)
ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
ucidef_set_led_netdev "modem" "modem" "green:modem" "wwan0"
;;
+humax,e2)
+ ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0"
+ ;;
iodata,wn-ac1167gr|\
iodata,wn-ac733gr3)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0radio"
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index a64891f94a..ea8394ec59 100644
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -100,7 +100,8 @@ ramips_setup_interfaces()
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan:5" "6@eth0"
;;
comfast,cf-wr800n|\
- hnet,c108)
+ hnet,c108|\
+ humax,e2)
ucidef_add_switch "switch0" \
"4:lan" "6@eth0"
;;