diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2022-02-18 00:23:45 +0100 |
|---|---|---|
| committer | Sungbo Eo <mans0n@gorani.run> | 2022-03-16 22:31:14 +0900 |
| commit | be89c9eec4c28123b61ed020ad5b8b02905e73af (patch) | |
| tree | 151238921999186e45c5f8e8cb6efbf7aa381881 /target/linux/ramips/mt7620 | |
| parent | 832b90216f5d9f5c825d7c89609fde9508d48d57 (diff) | |
| download | upstream-be89c9eec4c28123b61ed020ad5b8b02905e73af.tar.gz upstream-be89c9eec4c28123b61ed020ad5b8b02905e73af.tar.bz2 upstream-be89c9eec4c28123b61ed020ad5b8b02905e73af.zip | |
ramips: mt7620: Add support for D-Link DWR-961 A1
The DWR-961 A1 Wireless Router is based on the MT7620A SoC.
It's a merge of two Amit boards: DWR-960 with ethernet part
of Lava LR-25G001.
ROMID it's taken from Telenor branded version and it works with tested
device. Images from D-Link site for this router are from DWR-953 and it
have ROMID DLK6E2424001. I don't know if it's mistake on web-site
or if it's will require different image.
Specification:
- MediaTek MT7620A (580 Mhz)
- 128 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7612 mpcie card)
- 5x 10/100/1000 Mbps Ethernet: 4xLAN and 1xWAN (QCA8337)
- 2x internal, non-detachable antennas (Wifi 2.4G)
- 3x external, detachable antennas (2x LTE, 1x Wifi 5G)
- 1x LTE modem cat 6
- UART (J5) header on PCB (57600 8n1)
- 13x LED, 2x button
- JBOOT bootloader
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7620')
4 files changed, 15 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 1f53930311..5f105bd834 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -81,6 +81,10 @@ dlink,dwr-960) ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x2e" ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x01" ;; +dlink,dwr-961-a1) + ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0x3c" + ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x02" + ;; domywifi,dm202|\ domywifi,dm203|\ domywifi,dw22d) diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 47bd02f3d1..3ed72fa3ab 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -130,6 +130,13 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "6@eth0" ;; + dlink,dwr-961-a1) + ucidef_add_switch "switch0" \ + "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" "0@eth0" + ucidef_add_switch "switch1" \ + "5:lan" "6@eth0" + ucidef_add_switch_attr "switch1" "enable" "false" + ;; edimax,br-6478ac-v2|\ lb-link,bl-w1200|\ tplink,archer-c2-v1) @@ -303,6 +310,7 @@ ramips_setup_macs() dlink,dwr-921-c1|\ dlink,dwr-922-e2|\ dlink,dwr-960|\ + dlink,dwr-961-a1|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) lan_mac=$(macaddr_add "$wan_mac" 1) diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index 969e9eba63..81daca4978 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -10,7 +10,8 @@ dlink,dir-510l) ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" ;; -dlink,dwr-960) +dlink,dwr-960|\ +dlink,dwr-961-a1) ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1" ;; head-weblink,hdrm200) diff --git a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 291f89f41d..2d1ac2e872 100644 --- a/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/mt7620/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -29,6 +29,7 @@ case "$FIRMWARE" in dlink,dwr-921-c1|\ dlink,dwr-922-e2|\ dlink,dwr-960|\ + dlink,dwr-961-a1|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) wifi_mac=$(macaddr_add "$wan_mac" 1) |