diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-09 11:52:26 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-11 01:51:34 +0200 |
| commit | e6d4744f9ad0f76ddf1cded75355e240e81be41e (patch) | |
| tree | 9f68a39121883dcbea735ff468ece495729da027 /target/linux/ramips/mt7620 | |
| parent | 78e8360878d716c75fc98d6f93bdd61f156caa28 (diff) | |
| download | upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.gz upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.tar.bz2 upstream-e6d4744f9ad0f76ddf1cded75355e240e81be41e.zip | |
ramips: fix WAN LED for D-Link DIR-810L/TRENDnet TEW-810DR
The WAN LED on DIR-810L was actually blinking on LAN1 port
activity. This has already been improved for the TEW-810DR, where
the GPIO has been set up explicitly rather than having it controlled
by the switch.
This patch also applies this setup to the DIR-810L.
In addition, the trigger in 01_leds is set up with
ucidef_set_led_switch for both devices now, so state changes should
be displayed correctly as well.
Reported-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [DIR-810L]
Tested-by: J. Scott Heppler <shep971@centurylink.net> [TEW-810DR]
Diffstat (limited to 'target/linux/ramips/mt7620')
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/01_leds | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index e7b9413a48..2b2ac6b46b 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -54,6 +54,10 @@ comfast,cf-wr800n) ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1 set_wifi_led "$boardname:white:wifi" ;; +dlink,dir-810l|\ +trendnet,tew-810dr) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; dlink,dwr-116-a1|\ head-weblink,hdrm200|\ ohyeah,oy-0001|\ @@ -191,9 +195,6 @@ tplink,archer-mr200) tplink,re200-v1) ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" ;; -trendnet,tew-810dr) - ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" "eth0.2" - ;; youku,yk1) set_wifi_led "$boardname:blue:air" ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10" |