diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-09-27 00:16:33 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-17 13:36:11 +0100 |
| commit | 38bdfcdb87e9b3a1232e9820bd6534da4c28282b (patch) | |
| tree | 0d548e896d109870cb6b7f71a7b0e3f8379bcaa8 /target/linux/ramips/mt7620 | |
| parent | 01d39cd18c4035e362f179548cd2c051aac03042 (diff) | |
| download | upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.gz upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.bz2 upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.zip | |
ramips: add support for ipTIME A104ns
ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100Mbps
- Switch: SoC internal
- USB: 1x 2.0
- UART:
- J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
In contrast to to-be-supported A1004ns, the A104ns has no usable
value in 0x1fc40 (uboot), so wan_mac needs to be calculated.
Also note that GPIOs for the LEDs really are inverted compared to
the A1004ns.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[moved state_default to device DTS, reordered properties in wmac,
added comment about wan_mac and LED GPIOs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/mt7620')
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 20846ef202..852336f811 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -139,6 +139,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch1" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; + iptime,a104ns) + ucidef_add_switch "switch0" \ + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" + ;; kingston,mlw221) ucidef_set_interface_lan "eth0.2" ;; @@ -301,6 +305,9 @@ ramips_setup_macs() iodata,wn-ac733gr3) wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr) ;; + iptime,a104ns) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary u-boot 0x1fc20)" 2) + ;; lenovo,newifi-y1|\ lenovo,newifi-y1s|\ ohyeah,oy-0001|\ |