aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/mt7620/target.mk
diff options
context:
space:
mode:
authorKristian Evensen <kristian.evensen@gmail.com>2019-05-15 20:50:45 +0200
committerPetr Štetiar <ynezz@true.cz>2019-05-17 21:41:43 +0200
commit52b59a984fd9735d26069b0c31baedf5344703d3 (patch)
treef1a21cd60c5fdcd811f37aa42c572e3179bb1dcd /target/linux/ramips/mt7620/target.mk
parent782eda9750e5f0d2bda103e1fbe5154032e85822 (diff)
downloadupstream-52b59a984fd9735d26069b0c31baedf5344703d3.tar.gz
upstream-52b59a984fd9735d26069b0c31baedf5344703d3.tar.bz2
upstream-52b59a984fd9735d26069b0c31baedf5344703d3.zip
ramips: Add support for Head Weblink HDRM200
Head Weblink HDRM200 is a dual-sim router based on MT7620A. The detailed specifications are: - MT7620A (580MHz) - 64MB RAM - 16MB of flash (SPI NOR) - 6x 10/100Mbps Ethernet (MT7620A built-in switch) - 1x microSD slot - 1x miniPCIe slot (only USB2.0 bus). Device is shipped with a SIMCOM SIM7100E LTE modem. - 2x SIM slots (standard size) - 1x USB2.0 port - 1x 2.4GHz wifi (rt2800) - 1x 5GHz wifi (mt7612) - 1x reset button - 1x WPS button - 3x GPIO-controllable LEDs - 1x 10 pin terminal block (RS232, RS485, 4 x GPIO) Tested: - Ethernet switch - Wifi - USB slot - SD card slot - miniPCIe-slot - sysupgrade - reset button Installation instructions: Installing OpenWRT for the first time requires a bit of work, as the board does not ship with OpenWRT. In addition, the bootloader automatically reboots when installing an image over tftp. In order to install OpenWRT on the HDRM200, you need to do the following: * Copy the initramfs-image to your tftp-root (default filename is test.bin) and configure networking accordingly (default server IP is 10.10.10.3, client 10.10.10.123). Start your tftp server. * Open the board and connect to UART. The pins are exposed and clearly marked. * Boot the board and press 1. * Either use the default filename and client/server IP-addresses, or specify your own. The image should now be loaded to memory and board boot. If the router reboots while the image is loading, you need to try again. Once the board has booted, copy the sysupgrade-image to the router and run sysupgrade in order to install OpenWRT to the flash. Notes: - You control which SIM slot to use by writing 0/1 to /sys/class/gpio/gpio0/value. In order for the change to take effect, you can either use AT-commands (AT+CFUN) or power-cycle the modem (write 0/1 to /sys/class/gpio/gpio21/value). - RS485 is available on /dev/ttyS0. - RS232 is available on /dev/ttyS1. - The name of the ioX-gpios map to the labels on the casing. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> [fixed whitespace issue and merge conflict in target.mk] Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/mt7620/target.mk')
-rw-r--r--target/linux/ramips/mt7620/target.mk2
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/ramips/mt7620/target.mk b/target/linux/ramips/mt7620/target.mk
index 788c9a1dfc..f3d450edf4 100644
--- a/target/linux/ramips/mt7620/target.mk
+++ b/target/linux/ramips/mt7620/target.mk
@@ -4,7 +4,7 @@
SUBTARGET:=mt7620
BOARDNAME:=MT7620 based boards
-FEATURES+=usb
+FEATURES+=usb ramdisk
CPU_TYPE:=24kc
DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic