diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2018-04-19 09:20:58 +0200 |
|---|---|---|
| committer | Daniel Golle <daniel@makrotopia.org> | 2020-04-08 14:05:51 +0100 |
| commit | c948a4782ba9e99f690a75ddf95ad76add95b5fa (patch) | |
| tree | 2821d94a508dce5b2145b493da7ae97eae051286 /target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches | |
| parent | 5a5a9b7a7500379e79410a8a955381ec0fa486ae (diff) | |
| download | upstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.tar.gz upstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.tar.bz2 upstream-c948a4782ba9e99f690a75ddf95ad76add95b5fa.zip | |
ramips: add support for D-Link DWR-960
The DWR-960 Wireless Router is based on the MT7620A SoC.
Specification:
- MediaTek MT7620A (580 Mhz)
- 128 MB of RAM
- 16 MB of FLASH
- 1x 802.11bgn radio
- 1x 802.11ac radio (MT7610 mpcie card)
- 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN)
- 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035)
- 2x internal, non-detachable antennas (Wifi 2.4G)
- 3x external, detachable antennas (2x LTE, 1x Wifi 5G)
- 1x LTE modem
- UART (J4) header on PCB (57600 8n1)
- 9x LED, 2x button
- JBOOT bootloader
Known issues:
- Flash is extremely slow.
Installation:
Apply factory image via http web-gui or JBOOT recovery page
How to revert to OEM firmware:
- push the reset button and turn on the power. Wait until LED start
blinking (~10sec.)
- upload original factory image via JBOOT http (IP: 192.168.123.254)
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Diffstat (limited to 'target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches')
| -rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches index 85380d84a8..f2355fdb97 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/03_gpio_switches @@ -11,6 +11,9 @@ dlink,dir-510l) ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" ;; +dlink,dwr-960) + ucidef_add_gpio_switch "power_mpcie" "mPCIe power" "0" "1" + ;; head-weblink,hdrm200) ucidef_add_gpio_switch "sim_switch" "SIM slot switch" "0" ucidef_add_gpio_switch "io1" "I/O 1" "1" |