diff options
| author | NOGUCHI Hiroshi <drvlabo@gmail.com> | 2019-07-26 08:11:48 +0900 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-07-26 08:09:16 +0200 |
| commit | a1c6a316d2997b6bbee520fb1bf21f3b994f9e52 (patch) | |
| tree | 0b883afb24d53a30bd2416ebc6e1b0c1f531b8f3 /target/linux/ramips/image | |
| parent | 5cf897779eacf63cdbcdebd1af68c109096665c6 (diff) | |
| download | upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.tar.gz upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.tar.bz2 upstream-a1c6a316d2997b6bbee520fb1bf21f3b994f9e52.zip | |
ramips: add support for Fon FON2601
FON2601 is a wireless router.
Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
for 11b/g/n (upto 300 Mbps): MT7620A built-in WMAC
for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)
Installation (only available via UART):
1. download sysupgrade binary image by wget command
2. write sysupgrade binary image to Flash
command is:
mtd write sysupgrade.bin firmware
3. reboot
Important Notice:
Only one button is displayed as "WPS" on enclosure.
However, it is configured as "reset" (factory resetting feature).
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ramips/image')
| -rw-r--r-- | target/linux/ramips/image/Makefile | 5 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7620.mk | 13 |
2 files changed, 18 insertions, 0 deletions
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 36f95b6d1c..816146ece5 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -147,6 +147,11 @@ define Build/sercom-footer $(call Build/sercom-seal,-f) endef +define Build/fonfxcimage + uimage_padhdr -i $@ -o $@.new + mv $@.new $@ +endef + ifeq ($(SUBTARGET),rt288x) include rt288x.mk endif diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index d7b06076da..455f836168 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -372,6 +372,19 @@ define Device/elecom_wrh-300cr endef TARGET_DEVICES += elecom_wrh-300cr +define Device/fon_fon2601 + MTK_SOC := mt7620a + IMAGE_SIZE := 15936k + DEVICE_VENDOR := Fon + DEVICE_MODEL := FON2601 + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci + KERNEL_INITRAMFS := $$(KERNEL) | fonfxcimage + IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\ + fonfxcimage |\ + pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += fon_fon2601 + define Device/glinet_gl-mt300a MTK_SOC := mt7620a IMAGE_SIZE := 15872k |