aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
diff options
context:
space:
mode:
authorAlexey Bartenev <41exey@proton.me>2023-03-10 10:35:30 -0500
committerHauke Mehrtens <hauke@hauke-m.de>2023-03-27 02:09:58 +0200
commitdc79b51533cfe9a7806353f6c6fd6b22cd80d536 (patch)
treea19e7c16b1b247c3686d43b328c814971ce8c70f /target/linux/ramips/image
parent11c28cfceb5ec3cf734a155b45e5fb389e8fd422 (diff)
downloadupstream-dc79b51533cfe9a7806353f6c6fd6b22cd80d536.tar.gz
upstream-dc79b51533cfe9a7806353f6c6fd6b22cd80d536.tar.bz2
upstream-dc79b51533cfe9a7806353f6c6fd6b22cd80d536.zip
ramips: add support for Keenetic Lite III rev. A
General specification: SoC Type: MediaTek MT7620N (580MHz) ROM: 8 MB SPI-NOR (W25Q64FV) RAM: 64 MB DDR (EM6AB160TSD-5G) Switch: MediaTek MT7530 Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) Wireless: 2.4 GHz (MediaTek RT5390): b/g/n Buttons: 3 button (POWER, RESET, WPS) Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT) Bootloader: U-Boot 1.1.3 Power: 9 VDC, 0.6 A MAC in stock: |- + | | LAN | RF-EEPROM + 0x04 | | WLAN | RF-EEPROM + 0x04 | | WAN | RF-EEPROM + 0x28 | OEM easy installation 1. Use a PC to browse to http://my.keenetic.net. 2. Go to the System section and open the Files tab. 3. Under the Files tab, there will be a list of system files. Click on the Firmware file. 4. When a modal window appears, click on the Choose File button and upload the firmware image. 5. Wait for the router to flash and reboot. OEM installation using the TFTP method 1. Download the latest firmware image and rename it to klite3_recovery.bin. 2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the firmware image to the root directory of the server. 3. Power off the router and use a twisted pair cable to connect the PC to any of the router's LAN ports. 4. Configure the network adapter of the PC to use IP address 192.168.1.2 and subnet mask 255.255.255.0. 5. Power up the router while holding the reset button pressed. 6. Wait approximately for 5 seconds and then release the reset button. 7. The router should download the firmware via TFTP and complete flashing in a few minutes. After flashing is complete, use the PC to browse to http://192.168.1.1 or ssh to proceed with the configuration. Signed-off-by: Alexey Bartenev <41exey@proton.me>
Diffstat (limited to 'target/linux/ramips/image')
-rw-r--r--target/linux/ramips/image/mt7620.mk12
1 files changed, 12 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 6e528a930b..de84b232c1 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -1471,6 +1471,18 @@ define Device/zte_q7
endef
TARGET_DEVICES += zte_q7
+define Device/zyxel_keenetic-lite-iii-a
+ SOC := mt7620n
+ IMAGE_SIZE := 7872k
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := Keenetic Lite III
+ DEVICE_VARIANT := A
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size | \
+ zyimage -d 2102018 -v "ZyXEL Keenetic Lite III"
+endef
+TARGET_DEVICES += zyxel_keenetic-lite-iii-a
+
define Device/zyxel_keenetic-omni
SOC := mt7620n
IMAGE_SIZE := 7872k