diff options
| author | Dmytro Oz <sequentiality@gmail.com> | 2020-12-14 21:07:32 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-01-21 22:53:19 +0100 |
| commit | c2a7bb520a0fb107984ad3757174d391796cd222 (patch) | |
| tree | 22f95cc0940da31697af8edf9b197ea810f0f91a /target/linux/ramips/image | |
| parent | 93be5926a2c2ebda05486a43f998a2ee38d32e61 (diff) | |
| download | upstream-c2a7bb520a0fb107984ad3757174d391796cd222.tar.gz upstream-c2a7bb520a0fb107984ad3757174d391796cd222.tar.bz2 upstream-c2a7bb520a0fb107984ad3757174d391796cd222.zip | |
ramips: mt7621: add support for Xiaomi Mi Router 4
Xiaomi Mi Router 4 is the same as Xiaomi Mi Router 3G, except for
the RAM (256Mib→128Mib), LEDs and gpio (MiNet button).
Specifications:
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: MediaTek MT7621A (880 MHz, 4 cores)
FLA1: 128 MiB (ESMT F59L1G81MA)
RAM1: 128 MiB (ESMT M15T1G1664A)
WI1 chip1: MediaTek MT7603EN
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: MediaTek MT7612EN
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: MediaTek MT7621A
Switch: MediaTek MT7621A
UART Serial
[o] TX
[o] GND
[o] RX
[ ] VCC - Do not connect it
MAC addresses as verified by OEM firmware:
use address source
LAN *:c2 factory 0xe000 (label)
WAN *:c3 factory 0xe006
2g *:c4 factory 0x0000
5g *:c5 factory 0x8000
Flashing instructions:
1.Create a simple http server (nginx etc)
2.set uart enable
To enable writing to the console, you must reset to factory settings
Then you see uboot boot, press the keyboard 4 button (enter uboot command line)
If it is not successful, repeat the above operation of restoring the factory settings.
After entering the uboot command line, type:
setenv uart_en 1
saveenv
boot
3.use shell in uart
cd /tmp
wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin
wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin
mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin kernel1
mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin rootfs0
nvram set flag_try_sys1_failed=1
nvram commit
reboot
4.login to the router http://192.168.1.1/
Installation via Software exploit
Find the instructions in the https://github.com/acecilia/OpenWRTInvasion
Signed-off-by: Dmytro Oz <sequentiality@gmail.com>
[commit message facelift, rebase onto shared DTSI/common device
definition, bump uboot-envtools]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/image')
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index ff39cbf39a..005a9bdc55 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1277,6 +1277,14 @@ define Device/xiaomi_mi-router-3-pro endef TARGET_DEVICES += xiaomi_mi-router-3-pro +define Device/xiaomi_mi-router-4 + $(Device/xiaomi_nand_separate) + DEVICE_MODEL := Mi Router 4 + IMAGE_SIZE := 124416k + DEVICE_PACKAGES += kmod-mt7603 kmod-mt76x2 +endef +TARGET_DEVICES += xiaomi_mi-router-4 + define Device/xiaomi_mi-router-4a-gigabit $(Device/dsa-migration) $(Device/uimage-lzma-loader) |