aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
diff options
context:
space:
mode:
authorAndrew Yong <me@ndoo.sg>2017-01-08 14:30:10 +0800
committerMathias Kresin <dev@kresin.me>2017-01-13 08:32:35 +0100
commit3f31029b190417e12f4d19d9999cd52ec76d0f85 (patch)
tree93a92ab8ccc6b8e55af209e4c86788f47046e7bf /target/linux/ramips/image
parentd7fd1a0f8da37a978b138b2966c12d06bda55df5 (diff)
downloadupstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.gz
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.tar.bz2
upstream-3f31029b190417e12f4d19d9999cd52ec76d0f85.zip
ramips: add support for VoCore2
This patch adds support for the VoCore VoCore2 and its complementary "ultimate" dock. Specifications: - SoC: MediaTek MT7628AN (580MHz, ramips) - RAM: 128MB DDR2 166MHz - Storage: 16MB NOR SPI flash onboard + microSD slot on dock - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2 boards with onboard 1x chip antenna - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header - Dock hardware: - USB 2.0 socket - MicroSD socket - 100Mbps Ethernet x1 - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S DAC/ADC (support WIP) - Micro USB for power and console (UART2) Initial installation: - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on SSID "VoCore2" - Connect to VoCore2 by Ethernet or Wi-Fi - `ssh root@192.168.1.1` (password is "vocore") - scp/wget/etc. LEDE sysupgrade.bin to VoCore2 - `sysupgrade -n <your image>.bin` (don't keep old config, as the original firmware uses Ralink SDK Wi-Fi drivers and not mt76+mac80211) - after sysupgrade completes, Wi-Fi will be disabled by default so use Ethernet or the micro USB console to configure Wi-Fi again Signed-off-by: Andrew Yong <me@ndoo.sg>
Diffstat (limited to 'target/linux/ramips/image')
-rw-r--r--target/linux/ramips/image/mt7628.mk9
1 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk
index 7a7ddce3c9..4502588c80 100644
--- a/target/linux/ramips/image/mt7628.mk
+++ b/target/linux/ramips/image/mt7628.mk
@@ -19,6 +19,15 @@ define Device/miwifi-nano
endef
TARGET_DEVICES += miwifi-nano
+define Device/vocore2
+ DTS := VOCORE2
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+ DEVICE_TITLE := VoCore VoCore2
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
+ kmod-sdhci kmod-sdhci-mt7620
+endef
+TARGET_DEVICES += vocore2
+
define Device/wl-wn575a3
DTS := WL-WN575A3
IMAGE_SIZE := $(ralink_default_fw_size_8M)