diff options
| author | Chuanhong Guo <gch981213@gmail.com> | 2017-07-18 13:02:51 +0800 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2017-07-20 19:10:29 +0200 |
| commit | a4c84b2d734f0cba40b3d0a2183dbf221e7356e5 (patch) | |
| tree | d5400721563f7b72e6e15a926cb65c35dde7285d /target/linux/ramips/image | |
| parent | b81c04382b5ddea0164993c2af0df7270bb95ee4 (diff) | |
| download | upstream-a4c84b2d734f0cba40b3d0a2183dbf221e7356e5.tar.gz upstream-a4c84b2d734f0cba40b3d0a2183dbf221e7356e5.tar.bz2 upstream-a4c84b2d734f0cba40b3d0a2183dbf221e7356e5.zip | |
ramips: add support for Phicomm K2P
It uses one MT7615D radio chip with DBDC mode enabled. This mode allows
this single chip act as an 2x2 11n radio and an 2x2 11ac radio at the
same time. However mt76 doesn't support it currently so there is no
wireless available.
Specification:
- SoC: MediaTek MT7621AT
- Flash: 16 MB
- RAM: 128 MB
- Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps)
- Wireless radio: MT7615D on PCIE0
- UART: 1 x UART on PCB - 57600 8N1
Issue:
- Wireless radio doesn't work due to the lack of driver.
Flash instruction:
Using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put the firmware into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press 2,then follow the instruction to
set device and tftp server IP address and input the firmware
file name.U-boot will then load the firmware and write it into
the flash.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Diffstat (limited to 'target/linux/ramips/image')
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 7 |
1 files changed, 7 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 940b9d5a33..103534e060 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -88,6 +88,13 @@ define Device/hc5962 endef TARGET_DEVICES += hc5962 +define Device/k2p + DTS := K2P + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := Phicomm K2P +endef +TARGET_DEVICES += k2p + define Device/mt7621 DTS := MT7621 BLOCKSIZE := 64k |