diff options
| author | Maxim Anisimov <maxim.anisimov.ua@gmail.com> | 2018-01-09 14:25:53 +0300 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-01-15 21:45:43 +0100 |
| commit | 5bdd238b634a34b038fbea9046893de29a77c000 (patch) | |
| tree | be539d819e8fc80905b6574132ceebd081b9fb56 /target/linux/ramips/image | |
| parent | ff1e89553078cb1f8851276537d1267930d740df (diff) | |
| download | upstream-5bdd238b634a34b038fbea9046893de29a77c000.tar.gz upstream-5bdd238b634a34b038fbea9046893de29a77c000.tar.bz2 upstream-5bdd238b634a34b038fbea9046893de29a77c000.zip | |
ramips: add support for TP-Link Archer C20 v4
TP-Link Archer C20 v4 is a router with 5-port FE switch and
non-detachable antennas. It's based on MediaTek MT7628N+MT7610EN.
Specification:
- MediaTek MT7628N/N (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 5x 10/100 Mbps Ethernet
- 3x external, non-detachable antennas
- UART (J1) header on PCB (115200 8n1)
- 7x LED (GPIO-controlled*), 2x button, power input switch
* WAN LED in this devices is a dual-color, dual-leads type which isn't
(fully) supported by gpio-leds driver. This type of LED requires both
GPIOs state change at the same time to select color or turn it off.
For now, we support/use only the green part of the LED.
* MT7610EN ac chip isn't not supported by LEDE. Therefore 5Ghz won't
work.
Flash instruction:
The only way to flash LEDE image in ArcherC20v4 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.66/24 and tftp server.
2. Rename "openwrt-ramips-mt7628-ArcherC20v4-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with one of LAN ports, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Diffstat (limited to 'target/linux/ramips/image')
| -rw-r--r-- | target/linux/ramips/image/mt76x8.mk | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 8bbbcf6ad9..60864cfed3 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -139,6 +139,19 @@ define Device/tl-wr841n-v13 endef TARGET_DEVICES += tl-wr841n-v13 +define Device/tplink_c20-v4 + $(Device/tplink) + DTS := ArcherC20v4 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link ArcherC20 v4 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0xc200004 + TPLINK_HWREV := 0x1 + TPLINK_HWREVADD := 0x4 + TPLINK_HVERSION := 3 +endef +TARGET_DEVICES += tplink_c20-v4 + define Device/tplink_tl-mr3420-v5 $(Device/tplink) DTS := TL-MR3420V5 |