aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image
diff options
context:
space:
mode:
authorKristian Evensen <kristian.evensen@gmail.com>2019-05-16 15:38:00 +0200
committerPetr Štetiar <ynezz@true.cz>2019-05-17 21:41:43 +0200
commit869376710d70b1e2c9f5265bc8840738794bb280 (patch)
treef34e321807672a96572bff30ff60bfee2fdddd04 /target/linux/ramips/image
parent52b59a984fd9735d26069b0c31baedf5344703d3 (diff)
downloadupstream-869376710d70b1e2c9f5265bc8840738794bb280.tar.gz
upstream-869376710d70b1e2c9f5265bc8840738794bb280.tar.bz2
upstream-869376710d70b1e2c9f5265bc8840738794bb280.zip
ramips: Add support for ZBT WE826-E
ZBT WE826-E is a dual-SIM version of the ZBT WE826. The router has the following specifications: - MT7620A (580 MHz) - 128MB RAM - 32MB of flash (SPI NOR) - 5x 10/100Mbps Ethernet (MT7620A built-in switch) - 1x microSD slot - 1x miniPCIe slot (only USB2.0 bus) - 2x SIM card slots (standard size) - 1x USB2.0 port - 1x 2.4GHz wifi (rt2800) - 10x LEDs (4 GPIO-controlled) - 1x reset button The following have been tested and working: - Ethernet switch - wifi - miniPCIe slot - USB port - microSD slot - sysupgrade - reset button Installation and recovery: In order to install OpenWRT the first time or recover the router, you can use the web-based recovery system. Keep the reset button pressed during boot and access 192.168.1.1 in your browser when your machine obtains an IP address. Upload the firmware to start the recovery process. How to swap SIMs: You control which SIM slot to use by writing 0/1 to /sys/class/gpio/gpio13/value. In order for the change to take effect, you can either use AT-commands (AT+CFUN) or power-cycle the modem (write 0/1 to /sys/class/gpio/gpio14/value). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Diffstat (limited to 'target/linux/ramips/image')
-rw-r--r--target/linux/ramips/image/mt7620.mk9
1 files changed, 9 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index bad92ca0b9..cf38aa2cb1 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -818,6 +818,15 @@ define Device/zbt-we826-32M
endef
TARGET_DEVICES += zbt-we826-32M
+define Device/zbtlink_zbt-we826-e
+ DTS := ZBT-WE826-E
+ IMAGE_SIZE := 32448k
+ DEVICE_TITLE := Zbtlink ZBT-WE826-E
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 uqmi \
+ kmod-usb-serial kmod-usb-serial-option
+endef
+TARGET_DEVICES += zbtlink_zbt-we826-e
+
define Device/zbt-wr8305rt
DTS := ZBT-WR8305RT
DEVICE_TITLE := Zbtlink ZBT-WR8305RT