diff options
author | Felix Baumann <felix.bau@gmx.de> | 2023-04-21 03:39:38 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2023-05-02 18:24:52 +0200 |
commit | e38de40f8dd350344407fe5a91e81191f6960804 (patch) | |
tree | 7fe9a1f197ef91eddfbb8ebc191b1bcf3768f087 /target/linux/ramips/image/mt7621.mk | |
parent | cf8d861978dbfdb572a25db460db464b50d9e809 (diff) | |
download | upstream-e38de40f8dd350344407fe5a91e81191f6960804.tar.gz upstream-e38de40f8dd350344407fe5a91e81191f6960804.tar.bz2 upstream-e38de40f8dd350344407fe5a91e81191f6960804.zip |
ramips: mt7621: add support for Cudy X6 v2
Rename existing device to v1 and create common .dtsi
Difference to v1: 16MB Flash
Specifications:
SoC: MediaTek MT7621
RAM: 256 MB
Flash: 16 MB (SPI NOR, XM25QH128C on my device)
WiFi: MediaTek MT7915E
Switch: 1 WAN, 4 LAN (Gigabit)
Buttons: Reset, WPS
LEDs: Two Power LEDs (blue and red; together they form purple)
Power: DC 12V 1A center positive
Serial: 115200 8N1
C440 - (3V3 - GND - RX - TX) - C41 | v1 and v2
(P - G - R - T) | v2 labels them on the board
Installation:
Download and flash the manufacturer's built OpenWrt image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWrt image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings.
Recovery:
Loads only signed manufacture firmware due to bootloader RSA verification
Serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
Connect to any lan ethernet port
Power on the device while holding the reset button
Wait at least 8 seconds before releasing reset button for image to
download
MAC addresses as verified by OEM firmware:
use address source
LAN f4:a4:54:86:75:a2 label
WAN f4:a4:54:86:75:a3 label + 1
2g f4:a4:54:86:75:a2 label
5g f6:a4:54:b6:75:a2 label + LA-Bit set + 4th oktet increased
The label MAC address is found in bdinfo 0xde00.
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Diffstat (limited to 'target/linux/ramips/image/mt7621.mk')
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 24daba43aa..135febe3a6 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -543,16 +543,29 @@ define Device/cudy_wr2100 endef TARGET_DEVICES += cudy_wr2100 -define Device/cudy_x6 +define Device/cudy_x6-v1 $(Device/dsa-migration) IMAGE_SIZE := 32256k DEVICE_VENDOR := Cudy DEVICE_MODEL := X6 + DEVICE_VARIANT := v1 UIMAGE_NAME := R13 DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools - SUPPORTED_DEVICES += R13 + SUPPORTED_DEVICES += cudy,x6 R13 +endef +TARGET_DEVICES += cudy_x6-v1 + +define Device/cudy_x6-v2 + $(Device/dsa-migration) + IMAGE_SIZE := 15872k + DEVICE_VENDOR := Cudy + DEVICE_MODEL := X6 + DEVICE_VARIANT := v2 + UIMAGE_NAME := R30 + DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools + SUPPORTED_DEVICES += cudy,x6 R30 endef -TARGET_DEVICES += cudy_x6 +TARGET_DEVICES += cudy_x6-v2 define Device/dlink_dap-1620-b1 DEVICE_VENDOR := D-Link |