diff options
| author | Leon M. George <leon@georgemail.eu> | 2020-12-24 11:32:47 +0100 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2021-05-26 23:10:37 +0200 |
| commit | 3501db9b9b4a71ae52c539b46af817783c327866 (patch) | |
| tree | 080b7990589931cbc2a212413aab1d188e040bb3 /target/linux/ramips/image/mt7621.mk | |
| parent | a46ad596a3e076599f38a4132b5d6dfee8a3102a (diff) | |
| download | upstream-3501db9b9b4a71ae52c539b46af817783c327866.tar.gz upstream-3501db9b9b4a71ae52c539b46af817783c327866.tar.bz2 upstream-3501db9b9b4a71ae52c539b46af817783c327866.zip | |
ramips: add support for cudy WR2100
Specifications
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac
MT7603E / MT7615E
Ethernet: 5x Gbit ports
Installation
There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.
Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.
R4 & R5 need to be shorted (0-100Ω) for the UART to work.
Signed-off-by: Leon M. George <leon@georgemail.eu>
[remove non-required switch-port node - remove trgmii phy-mode]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/image/mt7621.mk')
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 9ff066c8c3..1ae49cb96e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -240,6 +240,16 @@ define Device/cudy_wr1300 endef TARGET_DEVICES += cudy_wr1300 +define Device/cudy_wr2100 + $(Device/dsa-migration) + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR2100 + IMAGE_SIZE := 15872k + UIMAGE_NAME := R11 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware +endef +TARGET_DEVICES += cudy_wr2100 + define Device/dlink_dir-8xx-a1 $(Device/dsa-migration) IMAGE_SIZE := 16000k |