diff options
author | Leon M. George <leon@georgemail.eu> | 2020-12-24 11:32:47 +0100 |
---|---|---|
committer | Petr Štetiar <ynezz@true.cz> | 2021-06-10 17:09:35 +0200 |
commit | d11f40a0f75bddb1339c6a0423553080acaeb75e (patch) | |
tree | 72ef65b18bbaf085411ab5e4a903f58552b2bda4 /target/linux/ramips/image/mt7621.mk | |
parent | 31be36126929751ac90ad6ff74a1df32feeb8e21 (diff) | |
download | upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.tar.gz upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.tar.bz2 upstream-d11f40a0f75bddb1339c6a0423553080acaeb75e.zip |
ramips: add support for cudy WR2100
Specifications
SoC: MT7621
CPU: 880 MHz
Flash: 16 MiB
RAM: 128 MiB
WLAN: 2.4 GHz b/g/n, 5 GHz a/n/ac
MT7603E / MT7615E
Ethernet: 5x Gbit ports
Installation
There are two known options:
1) The Luci-based UI.
2) Press and hold the reset button during power up.
The router will request 'recovery.bin' from a TFTP server at
192.168.1.88.
Both options require a signed firmware binary.
The openwrt image supplied by cudy is signed and can be used to
install unsigned images.
R4 & R5 need to be shorted (0-100Ω) for the UART to work.
Signed-off-by: Leon M. George <leon@georgemail.eu>
[remove non-required switch-port node - remove trgmii phy-mode]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 3501db9b9b4a71ae52c539b46af817783c327866)
Diffstat (limited to 'target/linux/ramips/image/mt7621.mk')
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index d56067948e..0ec283d74f 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -240,6 +240,16 @@ define Device/cudy_wr1300 endef TARGET_DEVICES += cudy_wr1300 +define Device/cudy_wr2100 + $(Device/dsa-migration) + DEVICE_VENDOR := Cudy + DEVICE_MODEL := WR2100 + IMAGE_SIZE := 15872k + UIMAGE_NAME := R11 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware +endef +TARGET_DEVICES += cudy_wr2100 + define Device/dlink_dir-8xx-a1 $(Device/dsa-migration) IMAGE_SIZE := 16000k |