diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-11-12 01:23:07 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-05-17 18:41:48 +0200 |
| commit | a4e9c8f14b63cd44300ed452312c03a69aae9ca1 (patch) | |
| tree | 0b3a77ff42a5e42b489913ac9e0e461a4d12c119 /target/linux/ramips/image/mt7621.mk | |
| parent | 46674723e1a44785b7638a7a1069139312c08bc2 (diff) | |
| download | upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.gz upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.tar.bz2 upstream-a4e9c8f14b63cd44300ed452312c03a69aae9ca1.zip | |
ramips: add support for netis WF2770
netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100/1000Mbps
- Switch: MT7530BU
- UART:
- J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1
MAC addresses in factory partition:
0x0004: LAN, WiFi 2.4GHz (label_mac-6)
0x0028: not used (label_mac-1)
0x002e: WAN (label_mac)
0x8004: WiFi 5GHz (label_mac+2)
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ramips/image/mt7621.mk')
| -rw-r--r-- | target/linux/ramips/image/mt7621.mk | 6 |
1 files changed, 0 insertions, 6 deletions
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 082bb31b79..343379b764 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -81,12 +81,6 @@ define Build/iodata-mstc-header ) endef -define Build/netis-tail - echo -n $(1) >> $@ - echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ - sed 's/../\\\\x&/g' | xargs echo -ne >> $@ -endef - define Build/ubnt-erx-factory-image if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \ echo '21001:6' > $(1).compat; \ |