diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-08-10 09:07:53 +0900 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2018-08-11 21:45:06 +0200 |
| commit | a6369206fe3306114f6c4b26a7cf50b91008cb25 (patch) | |
| tree | d2d83a78b70c60049d7d620e090a0eedaf9ab8c6 /target/linux/ramips/image/Makefile | |
| parent | 97de133368762824ba3d7e9d95f97011a597ec1a (diff) | |
| download | upstream-a6369206fe3306114f6c4b26a7cf50b91008cb25.tar.gz upstream-a6369206fe3306114f6c4b26a7cf50b91008cb25.tar.bz2 upstream-a6369206fe3306114f6c4b26a7cf50b91008cb25.zip | |
ath79: add support for I-O DATA WN-AC1600DGR2
I-O DATA WN-AC1600DGR2 is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.
Specification:
- Qualcomm Atheros QCA9557
- 128 MB of RAM
- 16 MB of Flash
- 2.4/5 GHz wifi
- 2.4 GHz: 2T2R (SoC internal)
- 5 GHz: 3T3R (QCA9880)
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- 115200n8
Flash instruction using factory image:
1. Connect the computer to the LAN port of WN-AC1600DGR2
2. Connect power cable to WN-AC1600DGR2 and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ramips/image/Makefile')
| -rw-r--r-- | target/linux/ramips/image/Makefile | 5 |
1 files changed, 0 insertions, 5 deletions
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 753e287d73..5426226795 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -108,11 +108,6 @@ define Build/poray-header mv $@.new $@ endef -define Build/senao-header - $(STAGING_DIR_HOST)/bin/mksenaofw $(1) -e $@ -o $@.new - mv $@.new $@ -endef - define Build/seama $(STAGING_DIR_HOST)/bin/seama -i $@ $(1) mv $@.seama $@ |