aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/dts
diff options
context:
space:
mode:
authorDaniel Kucera <daniel.kucera@gmail.com>2017-02-19 09:46:44 +0100
committerMathias Kresin <dev@kresin.me>2017-10-14 10:48:29 +0200
commit6f008af3f0b30d2af21ad6934c17b0ae69103ecd (patch)
tree38a4acdc3512354fa9befec44f591bcc831d0913 /target/linux/ramips/dts
parentf2b7d9dc1ca3d33f14961cf2885639f4f9e8965e (diff)
downloadupstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.gz
upstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.tar.bz2
upstream-6f008af3f0b30d2af21ad6934c17b0ae69103ecd.zip
ramips: add support for Kimax U25AWF-H1
Kimax U-25AWF-H1 is is a 2,5" HDD Enclosure with Wi-Fi/Eth conection and battery, based on MediaTek MT7620A. Patch rewritten from: https://forum.openwrt.org/viewtopic.php?pid=305643 Specification: - MT7620A CPU - 64 MB of RAM - 16 MB of FLASH - 802.11bgn WiFi - 1x 10/100 Mbps Ethernet - USB 2.0 Host - UART for serial console Flash instruction: 1. Download lede-ramips-mt7620-u25awf-h1-squashfs-sysupgrade.bin 2. Open webinterface a upgrade 3. After boot connect via ethernet to ip 192.168.1.1 Signed-off-by: Daniel Kucera <daniel.kucera@gmail.com> [fix reset button gpio, don't add a lan/wan vlan config for single port board, add -H1 suffix do make sure that this revision of the board is supported/tested] Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target/linux/ramips/dts')
-rw-r--r--target/linux/ramips/dts/U25AWF-H1.dts106
1 files changed, 106 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/U25AWF-H1.dts b/target/linux/ramips/dts/U25AWF-H1.dts
new file mode 100644
index 0000000000..8021b0f79d
--- /dev/null
+++ b/target/linux/ramips/dts/U25AWF-H1.dts
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/{
+ compatible = "kimax,u25awf-h1","ralink,mt7620a-soc";
+ model = "Kimax U25AWF-H1";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ wifi {
+ label = "u25awf:red:wifi";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "u25awf:green:lan";
+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&gpio3 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "uartf", "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+};