ramips: add support for TOTOLINK A3

TOTOLINK A3 is a clone of ipTIME A3. The only difference is the model name.

Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
  - 2.4GHz: SoC internal
  - 5GHz: MT7612EN
- Ethernet: 3x 10/100Mbps
  - Switch: SoC internal

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Tested on device by JasonHCH <hsuan670629@gmail.com>

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

1 files changed, 36 insertions, 0 deletions

diff --git a/target/linux/ramips/dts/mt7628an_totolink_a3.dts b/target/linux/ramips/dts/mt7628an_totolink_a3.dts
new file mode 100644
index 0000000000..87dd8559b7
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_totolink_a3.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an_iptime.dtsi"
+
+/ {
+	compatible = "totolink,a3", "mediatek,mt7628an-soc";
+	model = "TOTOLINK A3";
+
+	aliases {
+		led-boot = &led_cpu;
+		led-failsafe = &led_cpu;
+		led-running = &led_cpu;
+		led-upgrade = &led_cpu;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_cpu: cpu {
+			label = "a3:blue:cpu";
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan {
+			label = "a3:blue:wlan";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+	};
+};
+
+&esw {
+	mediatek,portmap = <0x3e>;
+	mediatek,portdisable = <0x32>;
+};