diff options
author | Lars Wessels <software@bytebox.org> | 2020-06-25 21:09:59 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2020-06-29 01:08:01 +0200 |
commit | dbaf0d20bb6afec4a592456af6b1238b46fa1acb (patch) | |
tree | 6d6d2a66cc28bfc036847f375d947ff164fdcf51 /target/linux/ramips/dts | |
parent | 5234593462bc72582fafd0769d3b679f9b598574 (diff) | |
download | upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.gz upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.tar.bz2 upstream-dbaf0d20bb6afec4a592456af6b1238b46fa1acb.zip |
ramips: add support for WAVLINK WL-WN577A2
This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band
wall-plug wireless router. In Germany this device is sold under the brand
name Maginon WL-755 (white case):
Device specifications:
- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps (Ralink RT3050)
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER
- Buttons: Reset, WPS
- Small sliding power switch
Flashing instructions (U-boot):
- Configure a TFTP server on your PC/Laptop and set its IP
to 192.168.10.100
- Rename the OpenWrt image to firmware.bin and place it in the
root folder of the TFTP server
- Power off (using the small sliding power switch on the left
side) the device and connect an ethernet cable from its LAN
or WAN port to your PC/Laptop
- Press the WPS button (and keep it pressed)
- Power on the device (using the small power switch)
- After a few seconds, when the WAN/LAN LED stops blinking
very fast, release the WPS button
- Flashing OpenWrt takes less than a minute, system will
reboot automatically
- After reboot the WPS LED will indicate the current OpenWrt
running status
Signed-off-by: Lars Wessels <software@bytebox.org>
[removed unused labels - fix whitespace errors - wrap commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ramips/dts')
-rw-r--r-- | target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts | 137 |
1 files changed, 137 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts new file mode 100644 index 0000000000..41dfec3275 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_wavlink_wl-wn577a2.dts @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +#include "mt7628an.dtsi" + +/ { + compatible = "wavlink,wl-wn577a2", "maginon,wlr-755", "mediatek,mt7628an-soc"; + model = "WAVLINK WL-WN577A2"; + + aliases { + led-boot = &led_wps; + led-failsafe = &led_wps; + led-running = &led_wps; + led-upgrade = &led_wps; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "wl-wn577a2:green:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "wl-wn577a2:green:wan"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + led_wps: wps { + label = "wl-wn577a2:green:wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "wdt", "p0led_an", "p3led_an", "p4led_an"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&wmac { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x2f>; +}; + +&usbphy { + status = "disabled"; +}; + +&ehci { + status = "disabled"; +}; + +&ohci { + status = "disabled"; +}; |