ramips: fix GB-PC1 and GB-PC2 device support

Change switch port labels to ethblack & ethblue.
Change lan1 & lan2 LEDs to ethblack_act & ethblue_act and fix GPIO pins.
Add the external phy with ethyellow label on the GB-PC2 devicetree.
Do not claim rgmii2 as gpio, it's used for ethernet with rgmii2 function.
Enable ICPlus PHY driver for IP1001 which GB-PC2 has got.
Update interface name and change netdev function.
Enable lzma compression to make up for the increased size of the kernel.
Make spi flash bindings on par with mainline Linux to fix read errors.

Tested on GB-PC2 by Petr.

Tested-by: Petr Louda <petr.louda@outlook.cz>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

1 files changed, 22 insertions, 25 deletions

diff --git a/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts b/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts
index 6854d56266..21a1839127 100644
--- a/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts
+++ b/target/linux/ramips/dts/mt7621_gnubee_gb-pc1.dts
@@ -8,10 +8,10 @@
 	model = "GB-PC1";
 
 	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
 	};
 
 	keys {
@@ -27,24 +27,26 @@
 	leds {
 		compatible = "gpio-leds";
 
-		system {
-			label = "green:system";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+		ethblack_act {
+			label = "green:ethblack_act";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 		};
 
-		led_status: status {
-			label = "green:status";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+		ethblue_act {
+			label = "green:ethblue_act";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 		};
 
-		lan1 {
-			label = "green:lan1";
-			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+		power {
+			label = "green:power";
+			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
 		};
 
-		lan2 {
-			label = "green:lan2";
-			gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+		led_system: system {
+			label = "green:system";
+			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
@@ -59,9 +61,8 @@
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <80000000>;
+		spi-max-frequency = <50000000>;
 		broken-flash-reset;
-		m25p,fast-read;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -99,10 +100,6 @@
 	status = "okay";
 };
 
-&ethernet {
-	pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
-};
-
 &gmac0 {
 	nvmem-cells = <&macaddr_factory_e000>;
 	nvmem-cell-names = "mac-address";
@@ -112,19 +109,19 @@
 	ports {
 		port@0 {
 			status = "okay";
-			label = "lan1";
+			label = "ethblack";
 		};
 
 		port@4 {
 			status = "okay";
-			label = "lan2";
+			label = "ethblue";
 		};
 	};
 };
 
 &state_default {
 	gpio {
-		groups = "jtag", "rgmii2", "uart3", "wdt";
+		groups = "jtag", "uart3", "wdt";
 		function = "gpio";
 	};
 };