ramips: add support for Asus RT-AC65P

The Asus RT-AC65P router is identical with the RT-AC85P, but better to make separate images for it.

On both routers the installation can be done also via SSH:

Note: The user/password for SSH is identical with the one used in the
Web-interface.

1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt factory image via scp:
 > scp openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin admin@192.168.50.1:/tmp
4. Connect via SSH to the router.
 > ssh admin@192.168.50.1
5. Write the OpenWrt image to flash.
 > mtd-write -i
/tmp/openwrt-ramips-mt7621-asus_rt-ac65p-squashfs-factory.bin -d linux
6. Reboot the router
 > reboot

Changelog:

v3: removed [] from filename, rebased to latest master
v2: Rebased to latest master
v1: Initial release

Signed-off-by: Gabor Varga <vargagab@gmail.com>

1 files changed, 2 insertions, 155 deletions

diff --git a/target/linux/ramips/dts/mt7621_asus_rt-ac85p.dts b/target/linux/ramips/dts/mt7621_asus_rt-ac85p.dts
index 3ddbfcfb7c..9f525d26ce 100644
--- a/target/linux/ramips/dts/mt7621_asus_rt-ac85p.dts
+++ b/target/linux/ramips/dts/mt7621_asus_rt-ac85p.dts
@@ -1,162 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_asus_rt-acx5p.dtsi"
 
 / {
 	compatible = "asus,rt-ac85p", "mediatek,mt7621-soc";
 	model = "ASUS RT-AC85P";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600";
-	};
-
-	palmbus: palmbus@1E000000 {
-		i2c@900 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "rt-ac85p:blue:power";
-			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-		wlan2g {
-			label = "rt-ac85p:blue:wlan2g";
-			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0radio";
-		};
-
-		wlan5g {
-			label = "rt-ac85p:blue:wlan5g";
-			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1radio";
-		};
-	};
-};
-
-&sdhci {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "u-boot";
-			reg = <0x0 0xe0000>;
-			read-only;
-		};
-
-		partition@e0000 {
-			label = "u-boot-env";
-			reg = <0xe0000 0x100000>;
-			read-only;
-		};
-
-		factory: partition@1e0000 {
-			label = "factory";
-			reg = <0x1e0000 0x100000>;
-			read-only;
-		};
-
-		factory2: partition@2e0000 {
-			label = "factory2";
-			reg = <0x2e0000 0x100000>;
-			read-only;
-		};
-
-		partition@3e0000 {
-			label = "kernel";
-			reg = <0x3e0000 0x400000>;
-		};
-
-		partition@7e0000 {
-			label = "ubi";
-			reg = <0x7e0000 0x2e00000>;
-		};
-
-		partition@35e0000 {
-			label = "firmware2";
-			reg = <0x35e0000 0x3200000>;
-		};
-	};
-};
-
-&pcie {
-	status = "okay";
-};
-
-&pcie0 {
-	wifi0: wifi@0,0 {
-		compatible = "pci14c3,7615";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x0000>;
-		ieee80211-freq-limit = <2400000 2500000>;
-	};
-};
-
-&pcie1 {
-	wifi1: wifi@0,0 {
-		compatible = "pci14c3,7615";
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-	};
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0xe000>;
-	mediatek,portmap = "wllll";
-	port@5 {
-		status = "disabled";
-	};
-};
-
-&i2c {
-	status = "disabled";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "uart2", "uart3", "i2c";
-			ralink,function = "gpio";
-		};
-	};
-};
+};
\ No newline at end of file