ramips: create common DTSI for Sunvalley Filehub devices

HooToo HT-TM05 and RAVPower RP-WD03 have almost identical hardware
(except for RAM size) and are from the same vendor (SunValley).

Create a common DTSI file for them.

Suggested-by: Russell Morris <rmorris@rkmorris.us>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 1 insertions, 129 deletions

diff --git a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
index a5469b655e..305ac0bf20 100644
--- a/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
+++ b/target/linux/ramips/dts/mt7620n_ravpower_rp-wd03.dts
@@ -1,16 +1,12 @@
 /dts-v1/;
 
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620n_sunvalley_filehub.dtsi"
 
 / {
 	compatible = "ravpower,rp-wd03", "ralink,mt7620n-soc";
 	model = "RAVPower RP-WD03";
 
 	aliases {
-		label-mac-device = &ethernet;
 		led-boot = &led_wifi_blue;
 		led-failsafe = &led_wifi_blue;
 		led-running = &led_wifi_blue;
@@ -30,128 +26,4 @@
 			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
 		};
 	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	virtual_flash {
-		compatible = "mtd-concat";
-
-		devices = <&firmware1 &firmware2 &firmware3>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				compatible = "openwrt,okli";
-				label = "firmware";
-				reg = <0x0 0x0>;
-			};
-		};
-	};
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&gpio3 {
-	status = "okay";
-};
-
-&i2c {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "config";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			partition@50000 {
-				label = "loader";
-				reg = <0x50000 0x10000>;
-				read-only;
-			};
-
-			firmware2: partition@60000 {
-				label = "firmware2";
-				reg = <0x60000 0x170000>;
-			};
-
-			partition@1d0000 {
-				label = "u-boot-env";
-				reg = <0x1d0000 0x10000>;
-			};
-
-			firmware3: partition@1e0000 {
-				label = "firmware3";
-				reg = <0x1e0000 0x20000>;
-			};
-
-			firmware1: partition@200000 {
-				label = "firmware1";
-				reg = <0x200000 0x600000>;
-			};
-		};
-	};
-};
-
-&ehci {
-	status = "okay";
-};
-
-&ohci {
-	status = "okay";
-};
-
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
-	ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&state_default {
-	gpio {
-		groups = "wled", "ephy";
-		function = "gpio";
-	};
 };