ramips: create shared DTSI for DIR-810L and TEW-810DR

These devices seem to have the same board, so let's have a common
file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 1 insertions, 111 deletions

diff --git a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
index 24d5fcb51f..679b429b6d 100644
--- a/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
+++ b/target/linux/ramips/dts/mt7620a_trendnet_tew-810dr.dts
@@ -1,10 +1,7 @@
 //SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_cameo_810.dtsi"
 
 / {
 	compatible = "trendnet,tew-810dr", "ralink,mt7620a-soc";
@@ -18,22 +15,6 @@
 		label-mac-device = &ethernet;
 	};
 
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -59,70 +40,6 @@
 	};
 };
 
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x0 0x30000>;
-				read-only;
-			};
-
-			partition@30000 {
-				label = "u-boot-env";
-				reg = <0x30000 0x10000>;
-				read-only;
-			};
-
-			factory: partition@40000 {
-				label = "factory";
-				reg = <0x40000 0x10000>;
-				read-only;
-			};
-
-			factory5g: partition@50000 {
-				label = "factory5g";
-				reg = <0x50000 0x10000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "Wolf_Config";
-				reg = <0x60000 0x10000>;
-				read-only;
-			};
-
-			partition@70000 {
-				label = "MyDlink";
-				reg = <0x70000 0x80000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "Jffs2";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			partition@170000 {
-				compatible = "denx,uimage";
-				label = "firmware";
-				reg = <0x170000 0x690000>;
-			};
-		};
-	};
-};
-
 &state_default {
 	gpio {
 		groups = "i2c", "uartf", "ephy";
@@ -130,37 +47,10 @@
 	};
 };
 
-&ethernet {
-	mtd-mac-address = <&factory 0x28>;
-	mediatek,portmap = "llllw";
-};
-
 &gsw {
 	mediatek,port4 = "ephy";
 };
 
-&pcie {
-	status = "okay";
-};
-
-&wmac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pa_pins>;
-
-	ralink,mtd-eeprom = <&factory 0x0>;
-	mtd-mac-address = <&factory 0x28>;
-};
-
-&pcie0 {
-	wifi@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		mediatek,mtd-eeprom = <&factory 0x8000>;
-		ieee80211-freq-limit = <5000000 6000000>;
-		mtd-mac-address = <&factory 0x28>;
-		mtd-mac-address-increment = <2>;
-	};
-};
-
 &gpio2 {
 	status = "okay";
 };