diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-22 21:26:01 +0100 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-23 02:24:55 +0100 |
commit | e4ce3109f28712dad3b3db27938a7b853346d9b6 (patch) | |
tree | 5bb59404fbefa9802792d03546508d48b5fcb5c7 /target/linux/ramips/dts/mt7620a_sanlinking_d240.dts | |
parent | a22b7a60d98836343c4f7b9ec0fcae68d9131522 (diff) | |
download | upstream-e4ce3109f28712dad3b3db27938a7b853346d9b6.tar.gz upstream-e4ce3109f28712dad3b3db27938a7b853346d9b6.tar.bz2 upstream-e4ce3109f28712dad3b3db27938a7b853346d9b6.zip |
ramips: simplify state_default/pinctrl0 in device DTS files
The node pinctrl0 is already set up in the SOC DTSI files, but
defined again as member of pinctrl in most of the device DTS(I)
files. This patch removes this redundancy for the entire ramips
target.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ramips/dts/mt7620a_sanlinking_d240.dts')
-rw-r--r-- | target/linux/ramips/dts/mt7620a_sanlinking_d240.dts | 36 |
1 files changed, 17 insertions, 19 deletions
diff --git a/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts b/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts index c2b94eebb3..35617c0880 100644 --- a/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts +++ b/target/linux/ramips/dts/mt7620a_sanlinking_d240.dts @@ -177,26 +177,24 @@ ralink,mtd-eeprom = <&factory 0>; }; -&pinctrl { - state_default: pinctrl0 { - default { - ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; - ralink,function = "gpio"; - }; +&state_default { + default { + ralink,group = "i2c", "uartf", "wled", "spi refclk", "pa"; + ralink,function = "gpio"; + }; - /* - * The sd function of the nd_sd group configures two of the - * groups pins as gpios. The pins are used as PCIe reset/power. - * Due to the driver load order, the pins are configured way to - * late if triggered by the sd-card driver. - * To not introduce another kind of driver load order - * dependency and configure the pins as early as possible, - * means during pinmux driver load. - */ - gpio_sd { - ralink,group = "nd_sd"; - ralink,function = "sd"; - }; + /* + * The sd function of the nd_sd group configures two of the + * groups pins as gpios. The pins are used as PCIe reset/power. + * Due to the driver load order, the pins are configured way to + * late if triggered by the sd-card driver. + * To not introduce another kind of driver load order + * dependency and configure the pins as early as possible, + * means during pinmux driver load. + */ + gpio_sd { + ralink,group = "nd_sd"; + ralink,function = "sd"; }; }; |